IKE TTL Sensor : no preflash mode with G2

Hi,

Just to see if I'm right. In manual mode, my G2 does no pre-flash. In this case, I've got to switch my sensor on "no preflash mode". Then, can I use the strobe in TTL mode, in manual mode, or both?

Thanks

I am fairly certain Ben that in manual mode, you cannot use TTL mode on your strobes. you will have to use AV, TV or P modes. You are correct that the G2 gives only a full dump in manual mode with no preflash.

If you want to shoot the G2 in manual mode, you should use manual control of the strobes as well. I believe Ike has a new sensor out that lets you variably adjust the strobe output.