Skip to content

Photography Gear and Technique / Archived topic

105mmVR with Nexus D70

Started by jcclink ·

  • 5Posts
  • 5Replies

Read-only discussion

105mmVR with Nexus D70

5 posts
  1. Anyone else trying to get this setup together? Seems to be a few interface problems. Hopefully Nexus has the required parts.

  2. I am using 105mm VR with my Nexus D-200 setup & am not aware of interface problem.

     

    Setup I am using is;

    MP60-5 60mm flat port

    PE20-7 20mm Extension

    FG NAFVRM105 MF Gear

    *Idel gear for housing

     

    * You have to change a gear in housing.

     

    As you see, I am using AF port (not using multi port) & very happy with my setup. It should work better with D-70 housing as D-70 housing has lens release lever & D-200 has not.

     

    Sam

  3. I am using 105mm VR with my Nexus D-200 setup & am not aware of interface problem.

     

    Setup I am using is;

    MP60-5 60mm flat port

    PE20-7 20mm Extension

    FG NAFVRM105 MF Gear

    *Idel gear for housing

     

    * You have to change a gear in housing.

     

    As you see, I am using AF port (not using multi port) & very happy with my setup. It should work better with D-70 housing as D-70 housing has lens release lever & D-200 has not.

     

    Sam

     

    The idle gear seemed to be the main problem, although the focus gear sleeve will not pass thru the rear of the 60-5 port. A 40mm (vs 20mm) ring may solve this problem. I found the 20-7 ring to measure exactly the same as my 20-5 ring. Interesting. The actual gear will just pass thru either ring. You have no interference problem between gear sleeve & 60-5 port? Wonder why I do. Thanks for input.

    Edited by jcclink
  4. Hi,

    I have friend using regular MP60-5 without MF gear & What I am using is MP60-5 Ver.2 they call. I will compare these 2 when I return home on 2 Jan. & let you know. Re PE20-5 vs.-7. I am using both & see no problem.

     

    Sam

    Edited by shchae
  5. Hi,

    I have friend using regular MP60-5 without MF gear & What I am using is MP60-5 Ver.2 they call. I will compare these 2 when I return home on 2 Jan. & let you know. Re PE20-5 vs.-7. I am using both & see no problem.

     

    Sam

     

    Thanks for the clarification. Saw the 60-5 V2 on Anthias webpage - figured it was probably bored out to accommodate the gear sleeve. Think I just need the new idle gear then to make it all work, assuming I use a 40mm ring vs 20mm. If that doesn't work I'll also buy the 60-5 V2.

    Jim

    P.S. Just tried the 40mm ring with my 60-5 port. It works! Plus it leaves room to add a diopter if you wish. Downside - its very awkward changing the camera battery. Just barely enough wiggle room to gain access without totally having to remove the camera.

    Edited by jcclink
Sea & Sea

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.