Skip to content

Beginner Forum / Archived topic

Subal CD5 setup

Started by JvA ·

  • 12Posts
  • 12Replies

Read-only discussion

Subal CD5 setup

12 posts
  1. I'm investing in an underwater setup for my Canon EOS 5D, but I'm still feeling a little bit lost in the underwater photo world ;) ...

     

    This is what I'm thinking of:

    • Subal CD5 with Nikonos flash connectors (second hand)

    • Sigma 15mm fishey with Subal DP-FE2 dome port

    • Inon Z-240 flashes

     

    I'm having a hard time figuring out the following:

    • Do I need Subal-specific base connections for the strobe arms, or are they universal?

    • What kind of sync cord do I need? I don't care much for TTL. I'm thinking about syncing one with a cord and the other one on slave.

    • What should I look for when selecting strobe arms? I would like to be able to easily disconnect the slave to fire it remotely.

    • Would it be a bad idea to buy a housing second hand?

    As far as I know there is no shop in the Netherlands where they carry both Subal and Inon and have this stuff in stock to try it out.

     

    Any help would be greatly appreciated!

    Edited by JvA
  2. Yes, you will need base adapters which slide onto the Subal housing and allow you to mount your strobe arms.

     

    Any sync cord that uses the Nikonos connector should work. You change the wiring inside the housing for TTL or manual connection, so don't need a specific cord.

     

    I really like Ultralight and TLC strobe arms.

     

    It would be a great idea to buy a housing second hand. I did :-) If you're worried, have it serviced by a Subal dealer before you dive it.

     

    Cheers

    James

  3. I'm investing in an underwater setup for my Canon EOS 5D, but I'm still feeling a little bit lost in the underwater photo world :wacko: ...

     

    This is what I'm thinking of:

    • Subal CD5 with Nikonos flash connectors (second hand)

    • Sigma 15mm fishey with Subal DP-FE2 dome port

    • Inon Z-240 flashes

     

    I'm having a hard time figuring out the following:

    • Do I need Subal-specific base connections for the strobe arms, or are they universal?

    • What kind of sync cord do I need? I don't care much for TTL. I'm thinking about syncing one with a cord and the other one on slave.

    • What should I look for when selecting strobe arms? I would like to be able to easily disconnect the slave to fire it remotely.

    • Would it be a bad idea to buy a housing second hand?

    As far as I know there is no shop in the Netherlands where they carry both Subal and Inon and have this stuff in stock to try it out.

     

    Any help would be greatly appreciated!

    I second the vote for the ULCS strobe arms. The base adapters and arms and clamps will cost a bit but basically last forever. The sync cord will be Nikonos to Sea&Sea or Nikonos to Inon (most cord makers understand Sea&Sea but not Inon; they are the same). Getting a housing second hand should be no issues but I would replace the main o-ring and do a dunk test with no camera inside to make sure that there are no leaks. The only other thing you might need is a diopter on the sigma using the dP-FE2 port but I am not sure. Ryan will know though. You will love this housing.

     

    Bill

  4. . The only other thing you might need is a diopter on the sigma using the dP-FE2 port but I am not sure.

     

    No diopter is required for the Sigma 15mm Fisheye and DP-FE2 dome port.

  5. The only other thing you might need is a diopter on the sigma using the dP-FE2 port but I am not sure. Ryan will know though. You will love this housing.

     

    I second the statement made by AndreSmith that no diopter is needed using the FE2 dome port with the sigma lens. OK, to be truthful, I actually have used the Nikkor 16mm lens with the FE2 dome port, but they are very similar with the difference being that the Sigma 15 focuses closer than the Nikkor 16. One of the reasons I bought the 16mm lens was specifically because Ryan said it didn't need a diopter! And I didn't want to buy yet another piece of uw equipment with my hard earned dollars :-) So, besides being an excellent lens with the FE2 domeport, it also saves a small amount of money.

     

    Ellen

  6. This is what I'm thinking of:[/b]

    • Subal CD5 with Nikonos flash connectors (second hand)

     

    Is this the kind of housing you're looking for?

     

    Subal Housing

     

    I checked out Reef Photo & Video's list of used equipment and found the above. The reason I mention it is because I purchased my used Subal housing for my D70S from Reef Photo and I've been extremely happy with my purchase. They check everything out and make sure it's working properly before they sell the housing to you. And they are a great source of information if you have any questions.

     

    As you can see, I'm a big believer in buying used housings. They save money and often work just as good as new, even if they have a scratch or two on them.

     

    Ellen

  7. Thank you all very much!

     

    I found a second hand housing somewhere else for only €1500, but the seller hasn't replied anymore since I asked for pictures, so I'm starting to become suspicious. The one on Reef Photo sounds much more reliable, that's still less than 2/3 of the retail price with import taxes :wacko:.

  8. Any thoughts on Inon strobe arms? What about B&J (is that even a brand)? I can't find any of the brands you mention with local shops.

     

    How useful do you find those arm floats?

     

    Thanks again!

  9. Any thoughts on Inon strobe arms? What about B&J (is that even a brand)? I can't find any of the brands you mention with local shops.

     

    How useful do you find those arm floats?

     

    Here's a link to some Ultralight strobe arms:

     

    Strobe Arms for Subal Housings

     

    The is one of the brands that the other posters were referring to.

     

    The other brand, Aquatica TLC arms can be found here:

     

    Aquatica TLC Strobe Arms

     

    Both are interchangeable and can be used together.

     

    As for the arm floats, I have purchased a set of floats but haven't gotten a chance to use them yet. Other uw photographers like them a lot as they make carrying around a housing that is negatively buoyant a lot easier. That's especially true if you're doing a multi-day diving trip.

     

    Ellen

  10. Thanks for all your advice, it has been most helpful.

     

    The housing arrived today; I'll do some test dives this weekend!

  11. I made my first dive with the underwater setup yesterday! Here are two photos of a Northern pike Esox lucius:

     

    3959731940_df23453ceb_o.jpg

     

    3958960441_1b730b8fa3_o.jpg

     

    A couple more at http://www.flickr.com/photos/jva/sets/72157622341837325/

     

    I'm really happy about the setup.

    Edited by JvA
  12. Congrats on the new rig Jorvis, I really like the second shot.

Isotta

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.