Took the 2 Sola 4000's to Lembeh last week. For the first 3 days they worked great. Then I started to have trouble with one of them.
Problem 1: The ball broke off of the light. There is a pin on the inside of the ball that prevents it from spinning. That broke. Not a huge issue, as I could just tighten the screw tighter and it would work till I could find a permanent solution.
Problem 2: Hindsight, this might not have been the best idea. but right after a dive, I went to plug the lights in to charge them. Blew out the contacts on the light and dried. Plugged in. I then touched the metal that screws on and off for the light and and got a little voltage through me. That was weird. So what do I do again.....touch it again. Zap...same thing. My hands were not totally dry, and started to think, that it probably wasn't a good idea to touch it again. So for the rest of the trip I avoided touching the metal. Not sure if it was because my hands were still wet......Do you guys think this is a problem I should worry about? Or just avoid touching it?
Problem 3: One of my lights stopped working. During the last dive before it died, the light was not switching levels or powering off. It took several tries to finally turn off during the dive. So back at the rinse tank, I was moving the slider up and down numerous times to try to clear out any crap that had gotten in there. It was here that it turn on for the last time. I couldn't get it to turn off. So I turned it to Airplane mode. This turned it off. Try to turn it back on and nothing. Fyi, I did have it fully charged.
I happened to remember that Backscatter (the place I bought it from) was in Lembeh the same time as I was, so we took it over to the resort they were at. Berkley White was kind enough to look at it. They even had a Light and Motion rep with them. They opened it up and couldn't find anything wrong that they could fix. So he told me to return it when I got home and it will covered under the warranty (just bought it in february).
It is nice that it is under warranty. But it still stinks that it happened on the first trip using the lights.
As far as burn times. For the morning 2 dives it was hard without charging in between, as I felt I had to conserve battery. But still could do the 2 dives out of them. Needed to turn them off in between shots, in order for it to work. And only used the power necessary. Is this the norm with other Lights of this intensity?
Aside from the problems. Light is easy to use, and give off a good beam. This was the first time I shot macro and used Lights, so I don't have anything to compare it to. But the footage I got was pretty decent I thought.
Dustin