Skip to content

Lights, Strobes, and Lighting Technique / Archived topic

Strobe Connector between PT 20 and Sea and Sea S/N Strobe

Started by mikedive ·

  • 5Posts
  • 5Replies

Read-only discussion

Strobe Connector between PT 20 and Sea and Sea S/N Strobe

5 posts
  1. Strobe Connector between PT 20 and Sea and Sea S/N Strobe

    Hy Guys,

    This is my first tread here so let me tell you someting obout me : I am an

    43 year old German diver I am diving since 1999 an I am an CMAS ** diver, my poor school english isn´t so good, but I try....

     

    Since 2001 I am using an C3000z in PT10 for takeing uw pics, the first aren´t very good so I bought a strobe a Sea and Sea YS60TTL/N and I use it with a slave adapter made in Germany by Matthias Heinrichs it is a microprozessor which triggers the strobe exaktly the same time as the internal stobe so it works perfekt even in P modus !. The stay and the strobearms are selfmade.

    Since August 2003 I sell them because there are no spezial parts for the digis in small polycarbonate housings. ( now I am at serial number 30 ! )

     

    My newest projekt is the synk connector between the PT20 and the Sea and Sea an the Niconos Strobes using the newest Oly TTL Konverter of

    Matthias Heinrichs (it works like the new Ikelite one ) .

     

    One version needs no direkt Contact to the recever (outside the housing) it is sending by IR : The litle cirquit tranfers the TTL flash dates form the Olympus into signals for the Niconos flash protocol, the outside recever triggers the flash in real TTL , you can use it with any Olympus cam with an extrenal flash connection e.g. C4000, C750, C5050, C5060 best of all you are able to use super makro modus with flash !!!

     

    The second version ist an " wire " version that needs a direkt 3 pole wire to the strobe. My prototype of the PT20 connektor is shown at my page

    www.mike-dive.de you have to klick at " Projekte "

     

    At " Montagebeispiele " you are able to see my Proline Stay with different

    housings and also my MD-Strobe-Arm. All is build in Aluminium eloxiert in english anodisiered ? and stainles steel and PVC

     

    If you have any questions ask I´ll try to answer

     

    Michael

  2. Hi Mike,

     

    Welcome to Wetpixel! I am happy to have another "engineering geek" here!

     

    I think this is a great idea to develop - are you working with Matthias?

     

    Perhaps you can "shrink" his OEM unit so that it can be fitted inside the Olympus housing. Then you can fabricate a special syncro cord which has an Olympus connector on one end and a Sea and Sea connector on the other.

     

    Thanks for the photos.

     

    Cheers

    James

  3. Hy James,

     

    Yes it is exaktly as you write: The cirquit is fittet in the hotshoe and connektet to the inner flash plug. Outside there ist the spezial Synkkable.

    I´m also planing a direckt connection to the flash rebuilding an original YS Synkkable with my Oly-Synk-Plug !

     

    Yes I work together with Matthias I am the mechanican an he ist the electronican. A

    very good relation I think .

    Have also a look at " Neuheiten " on my page you ll see an YS60 TTL with integeatet Laser and LED´s but it is the old version. In the new version the laser and LED´s are switched from outside wich a magnetic stick :

    first touch Laser on, second Laser off LED, on third both on ,fourth all out. In the moment of flashing all is out !! no red point at the pic ! after turning off the flash the prozessor recognices the last setting.

     

    It works great for nightshooting without Lamp and also for dayshoting for adjusting the flash The LED´s are 6 x 8500 mcd types in red/orange it is also good for autofokus.

     

    Michael

  4. You guys should consult for Sea and Sea and Ikelite! That sounds like some excellent circuit design.

     

    I would like very much for yourself and Matthias to decode the Nikon i-TTL next please.

     

    Sincerely,

    James Wiseman

  5. Hi guys,

     

    The stobe connector is ready now !!!!

     

    It works quite perfekt , third is send to England ( Craig Nelson ) soon we´ll get a report.

     

    It even works with the C8080 I have tested it yesterday ( with out housing but it works like the 5050 and 5060 )

     

    by the way Matthias Heinrichs has an Canon D300 to have a look at the E-TTL .......

    may be........E-TTL to Nicon TTL ?????

    next Nicon I-TTL ....... ??????

     

    I am looking for an American partner who speaks German as well, to do the import for USA . ( no commercial dealer please )

     

    Michael ( www.mike-dive.de )

Turtle

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.