Skip to content

Lights, Strobes, and Lighting Technique / Archived topic

DIY Underwater strobe, GN58

Started by drywh ·

  • 13Posts
  • 13Replies

Read-only discussion

DIY Underwater strobe, GN58

13 posts
  1. GN58 on land

    post-70299-0-17448900-1547812605_thumb.jpgpost-70299-0-30005800-1547812619_thumb.jpgpost-70299-0-92189800-1547812634_thumb.jpgpost-70299-0-91540900-1547812652_thumb.jpgpost-70299-0-30108500-1547812666_thumb.jpgpost-70299-0-59780300-1547812678_thumb.jpgpost-70299-0-86637600-1547812688_thumb.jpg

    Edited by drywh
  2. Anilao Philippines

    post-70299-0-96266900-1550292035_thumb.jpgpost-70299-0-49278100-1550292056_thumb.jpgpost-70299-0-80434600-1550292065_thumb.jpgpost-70299-0-92790000-1550292076_thumb.jpg

  3. I love a DIY project, I really do. Great work, thanks for sharing!

     

    You got some very nice blackwater shots too. I really need to try this myself.

  4. Hi,

    This is awesome! Could you share how you did the casing and connexion ?

    Cheers

  5. Hi,

    This is awesome! Could you share how you did the casing and connexion ?

    Cheers

    The housing is bonded with acrylic. Of course, there must be a groove in which silicone rubber rings are placed. I just draw pictures for Taobao and Taobao help me make them. But it was also done three times before it succeeded.
    Remove the photodiode from the flash and extend its wires. This allows the photodiode to be placed in front of the flash in the camera housing.
    Take the button off the GoPro housing and put it on my housing.
  6. The housing is bonded with acrylic. Of course, there must be a groove in which silicone rubber rings are placed. I just draw pictures for Taobao and Taobao help me make them. But it was also done three times before it succeeded.

    Remove the photodiode from the flash and extend its wires. This allows the photodiode to be placed in front of the flash in the camera housing.

    Take the button off the GoPro housing and put it on my housing.

    Could you send/upload picture particularly of the connexion and buttons?

    Thanks a lot for the information by the way

  7. The buttons were dug from the GoPro housing, using this tubular bit. Stick it to the acrylic panel.

     

    post-70299-0-68779800-1553160814_thumb.jpgpost-70299-0-64354700-1553160811_thumb.jpgpost-70299-0-84464300-1553160810_thumb.jpgpost-70299-0-77801100-1553160812_thumb.jpgpost-70299-0-69553700-1553160815_thumb.jpgpost-70299-0-70994600-1553160816_thumb.jpg

    Edited by drywh
  8. updated version

     

    post-70299-0-84097100-1557127127_thumb.jpg

    post-70299-0-00664900-1557127131_thumb.jpg

    post-70299-0-40852900-1557127129_thumb.jpg

     

    to be continued

  9. post-70299-0-02829700-1558146550_thumb.jpg

     

    twins

    Edited by drywh
  10. DId two Underwater strobe

    202001031455131.jpg

  11. 20200103164155.thumb.jpg.e18bee333a2c181a5091141d9c91df59.jpg

    20200103164159.jpg

  12. This is ingenious and very impressive. Well done!

Retra

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.