Skip to content

Lights, Strobes, and Lighting Technique / Archived topic

Hot spot with DS125

Started by underexposed ·

  • 5Posts
  • 5Replies

Read-only discussion

Hot spot with DS125

5 posts
  1. Hot spot with DS125

    When I use the aiming light on my Ikelite DS125 strobe I can see a bright spot where the light is shining in the pic. Is there a setting I can change to remove it?

    I did a search and couldn't find the answer.

  2. Speeding up your shutter will eliminate the aiming light from your picture. 1/250 or so should suffice.

  3. Or you could not direct your strobes directly at the subject, but rather move them outward so the beam misses the subject but still lights it up enough to see through the viewfinder. Don't get caught in the trap of using your strobe's aiming lights to position your strobes directly on the subject.

     

    Joe

  4. The only time it's an issue is at night. I use the aiming light as a dive light. This way I know what the camera is looking at...or I'm just to lazy to hold both...:)

  5. If you are shooting at night anyway, so there is no ambient exposure you are trying to get, then Don Hughes' idea is the right way to go.

     

    Since you are shooting a pure flash exposure, all that matters is aperture, and stobe output, that determines the exposure you want. The shutter and aperture, determine the "ambient" exposure, from the modeling light. So, pick the fastest shutter speed you can use, and still get the strobe to sync.

     

    Are you using the lowest ISO setting, as well? That will reduce ambient exposure, as long as you have enough bang in the strobe(s), to get a good exposure.

     

    Don

AOI

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.