I would like to mount my dive light to my Fantasea housing hot shoe. Is there an adapter made for this or has anyone done a DIY mount?
- 9Posts
- 9Replies
Read-only discussion
hot shoe light mount
-
-
ULCS make a number of hot shoe mounts:
https://ulcs.com/accessory-shoe-mounts/
What sort of fitting does your dive light have?
-
You can use something like this: https://www.scubapix.com/essentials/arms-clamps-trays/mounts/25321-long-strobe-mounting-ball-for-cold-shoe/
or
https://www.opticaloceansales.com/nauticam-long-stem-ys-cold-shoe-mount.html
I prefer the long versions as it gives more flexibility pointing the light downwards, there will be other brands about - all cold shoes are pretty much the same.
-
On 4/22/2021 at 5:34 PM, rwe said:
I would like to mount my dive light to my Fantasea housing hot shoe. Is there an adapter made for this or has anyone done a DIY mount?
Highly recommend NOT mounting anything on hotshoe. It will get loose at the worst moment and fall off, sometimes when you don't notice. Speaking from personal experience, I now nail down tight all lights via clamps / screws, and don't even use bayonet mounts for wide angle wet lenses.
-
If you go with the ULCS system they will also include an "Oh $hit Leash" for your light in case it does fall off.
-
3 hours ago, Dann-Oh said:
If you go with the ULCS system they will also include an "Oh $hit Leash" for your light in case it does fall off.
My focus light is cold shoe mounted and has a lanyard and I loop that around the closest arm clamp and tighten the little bungee clip down - doesn't interfere with the clamp operation or positioning the light and will save the light if it comes loose, plus it keeps the lanyard from floating around.
-
10 hours ago, pygmy_whaleshark said:
I ... don't even use bayonet mounts for wide angle wet lenses.
It really depends on what kind of bayonet mount. Some (like the Nauticam) have a positive lock you must press to release them.
-
Even with the bayonet mount I use a lanyard. When it is moved from the port to the arm bracket I know that if I don’t have a lanyard I will drop it, and most likely on a wall dive!
-
On 7/20/2021 at 8:11 PM, tursiops said:
It really depends on what kind of bayonet mount. Some (like the Nauticam) have a positive lock you must press to release them.
I used to use the INON bayonet mount, which also had the lock. Guess what a quick accidental twist during a strong current caused me to lose the lens once, and I only found out when I drifted too far away. I've never found the need to constantly swap wide/ macro wet lenses on any dive, so I just screw them in now.