Content Type
Profiles
Articles
Events
Forums
Gallery
Store
Posts posted by monkeybusiness
-
-
Selling my domeport kit for the Sony Sel1018 or the PZ1020. Perfect solution for shooting e.g. wrecks.
The dome also fits other lenses like the Sony 16mm Fisheye.
Suitable for the Fantasea a6xxx series like a6400, a6500, a6300...
Selling because of a new system. Happy to share example shots!
Consisting of:
Fantasea 6' Domeport
Fantasea Port extention 25
Zoom gear for the 1018 (also fits the 1020)
All parts are in very good condition and come with accessoires and spare o-rings.
!The dome has been carefully polished once after a scratch!
Price: 450€ + Shipping
Shipping on buyers expense from Europe/ Austria.
-
-
Price update:
Dropping price to 480€ for the housing, flat port and gear for 1650.
(excl. shipping)
-
Camera body sold, housing and ports still available
-
Hi, are you shipping to europe?
-
Switched camera body and therefore I'm selling my Fantasea housing for the Sony a6400 with 60m depht rating. Comes with the vakuum system and moisture detection installed.
Price: 650€ excl shipping from Europe
Included are:
- Housing with spare oring, electronics and pump
- Flat Port for the Sony 1650 with spare oring
- Zoom Gear for the Sony 1650
- Some spare parts for the housing
Camera, Lens, Port Extention and more zoom gears are also for sale seperatly:
- Sony a6400 body: 650€ with accessoires and leather bag
- Fantasea Port extention 25: 210€
- Fantasea Zoom Gear for Sony SEL1018: 50€
- Fantasea Zoom Gear for Sony 90mm: 50€
- Camera tray from Nitescuba with Handle: 90€
The housing is dry and holds its vakuum perfectly fine. Was never flooded and every button works. Flat Port has no scratches in the Glass.
The housing has around 80 dives. There is some small scratches at the bottom, which are only on the very surface, but please check the pictures yourself. The small mirror for fiber optics on one side is less reflective, this may affect some ttl led triggers, works fine with the integrated flash and manual led triggers. This should be easy to change if needed. Otherwise good condition. Was always taken care of and rinsed after every dive.
Shipping on buyers cost within the EU, no warranty or returns
-
7 hours ago, Chris Ross said:
A 6"dome is really a little small for a rectilinear lens that wide even on APS-C. The 6"dome from Fantasea is not a full 180° dome so the geometry likely means the lens entrance pupil is positioned forward of the dome centre of curvature to avoid vignetting so is not optimal. A bigger dome helps of course but the largest offered by Nauticam is the 180mm dome. You could use the 8.5"acrylic dome and it seems to use 10-15mm more extension than the 180mm dome.
Focusing closer has also been mentioned you don't need Manual focus to do that, just use back button focus to focus on something closer in the scene and stopping down to the f11-13 range will also help your corners.
As far as distortion goes, all the wet lenses have some level of distortion probably best handled by where you place straight lines in the composition, they bend more as you go towards the corners of course, so for example the image DSC01971 you posted above would have obvious distortion with those straight lines top and bottom of frame.
Thanks for sharing!
Apart from the vignetting though, dsc01971 looks quite sharp right? (Pz1020, 6' dome) But I see your point, 6' is a very small dome. The 8.5 that i found is n120. So yea maybe with an adaptor.
What I wonder though is if the 1018 maybe performs better, because it has an 7' Port from nauticam. In general the 1018 is not super sharp in the edges even top side.
But going for the 1018 with 7' instead of 1020 6' could be an option.
Curious if anybody here uses the 1018 behind the 7'?
Currently prefering the wwl-c, even its way more money and i have both lensens flying around. Maybe i get used to the distortion.
-
Also, i just saw that there is even a special flat port just for the sel16-50 and the wet lenses fro. Ääm Nauticam:
-> instead oft the 45 port, there is also an 40 port o_O.
-
On 2/26/2024 at 10:04 PM, gremlin said:
Has anyone got any experience with the Turtle on a set of YS-D2 (non J Variant). The website seems to indicate that one of the variants will work for TTL, the UWT specifically does not work with those strobes.
I am using the turtle with the ys-d3 mkII. I have still kinda unresolved issues for sttl, it does random over exposing. It seems that they really need the original sea&sea fiber cables have inon).
I can report in some weeks when i get the new cables.
-
25 minutes ago, Barmaglot said:
Pete Atkinson did a mini-test of that a few years back, on a Nikon Z50, comparing a Sigma 8-16, WWL-C on 16-50Z and a Tokina 10-17mm.
The second image is the Wwl-c?
Looks kinda good regarding distortion.
-
20 minutes ago, monkeybusiness said:
Okay thanx. But yea of course this is not a great examnullple, as I just learned a bit to avoid them.
Here are some more pictures to compare, the P29 wreck (the one above) as well as the turtle and canyon are shot with the SEL1018, mostly F9. The turtle e.g. was a time where i did not know how to avoid those on the 1018. Even after editing I am really unhappy with the corner sharpness.
Comparing with the PZ1020, its generally better even in the same 6' dome. *not a final edit*
And an unedited raw with my beautifully scratched old dome, PZ1020,@ 10mmf11:
DSC01971.ARWSo back to my question:
- Corner sharpness is okayish with the 1020 at f11 behind a 6' dome, as long as i am not using lens correction (see the raws). -> Depending on your feedback
- Yes i have a significant "barrel" distortion with the WWL-C at ~124°. Maybe not so much at 110° (as the 1020). But on the other hand, the image quality could be way better when close to the ground(?)
- To the suggestion about the bigger dome: I thought about that, while I would even go with a bigger dome (dont see any in the port charts) I question myself if that not defeats the point in having a rather compact setup. But yea, if you by any chance know an acrylic port that might fit, its a consideration
-
1 hour ago, Barmaglot said:
Yes, all wet lenses currently available on the market give you significant barrel distortion ("fisheye effect"). WWL-C, AFAIK, is identical to WWL-1 in this regard. On wildlife images it is fine and often even desirable; on wrecks, it's a matter of personal taste - some people don't mind it, others prefer keeping straight lines straight.
To me, the corners of your 10-20mm image look just fine - I mean, it's just sand and rubble there, who cares? - but if you want to improve them, a bigger dome would help. Another option is to use manual focusing to shift the focus point closer to the camera - as I understand it, autofocus is biased towards putting more DoF behind your focus point (I've seen figures of 2/3 behind 1/3 in front), which further degrades your corners. Using manual focus can alter this behavior, although looking at Nauticam's port chart, there is no native option for it - I suppose that if you use an N85 to N120 port adapter with knob (as they specify for the 180mm glass dome), you could print your own gear to connect the focus ring to the adapter knob, while zoom ring is connected to the housing's knob.
Okay thanx. But yea of course this is not a great examnullple, as I just learned a bit to avoid them.
Here are some more pictures to compare, the P29 wreck (the one above) as well as the turtle and canyon are shot with the SEL1018, mostly F9. The turtle e.g. was a time where i did not know how to avoid those on the 1018. Even after editing I am really unhappy with the corner sharpness.
SEL1018:
PZ1020:
Comparing with the PZ1020, its generally better even in the same 6' dome. *not a final edit*
And an unedited raw with my beautifully scratched old dome, PZ1020,@ 10mmf11. Keep in mind that the vignetting is due to an too big extension ring, there is no shorter one for Fantasea.
- 1
-
19 minutes ago, Barmaglot said:
Not quite a wreck, but here is a comparison shot of WWL-1, WACP-C, WACP-1 and a 16-35mm behind a 230mm dome:
If you're concerned about corner sharpness with 10-18mm/10-20mm, you could use a larger dome such as 180mm.
Thx for sharing. What i see on your example is, that there is kinda a fisheye effect right? Would be curious how the WWL-C performs there.
- 1
-
33 minutes ago, ChipBPhoto said:
Great question! I used a Tokina 10-17 fisheye on an APS-C system for many years. I loved it! I do mostly wreck and CFWA type images. About 3 years ago I switched to a WWL-1B after hearing about the sharp corners and a 130 degree FoV, all while still having a nice zoom range. I have been extremely happy with the results!The only time I miss my true fisheye is if I am extremely close to a wreck and want a super wide 180 degree image. That is relatively rare for me. Having the zoom aspect and sharp corners, even at f/8 on an APS-C has more than made up for any downside by giving a much more expansive option of images with a single lens. The close focus capability of the WWL is also a huge bonus!
Hope this helps!
Thanks for the rapid answers!
Out of curiosity, is this also a Sony system?
What i am currently not really looking into, is any extreme fisheye look, but i don't mind a little bit of distortion. Do you might have an example of your wreck pics?
Never did these 180°, i might not miss it 😃
I saw that the WWL-1B only offers 110° with the supported 16-50 lens, so i might consider the WWL-C which offers 124°.
To be clear about my "style" of pictures, here is an example that i have already uploaded, taken with the 1018: -
Hi guys,
I have seen a couple of threads regarding wet lenses or wide angle, but not so much comparing these 2 solutions.
I am currently using an Sony PZ1020 on my Sony a6400 behind a Fantasea 6' dome.
Switching to Nauticam now and I am planning to buy a WWL-C or an WWL-1b. The alternative would be using the PZ1020 behind a 6inch Acrylic port from nauticam as before.
From what I heard, the Nauticam lenses have way more corner sharpeness and and of course more FOV.
I ask myself, will I like the look of those lenses? Especially compared to a traditional one with 110° FOV
What are the downsides of these wet lensens? E.g. how do they perform with big wreck shots and details on the wreck.
Do any of you maybe have some experiences on APS-C or examples of wreck shots?
-
-
Hi, I am new here and searching for gear and a community to exchange underwater shots and tipps&tricks. I mostly shoot wrecks and wide angle.
- 2
FS: Fantasea A6x00 Domeport KIT
in Classifieds
Posted
Selling my domeport kit for the Sony Sel1018 or the PZ1020. Perfect solution for shooting e.g. wrecks.
The dome also fits other lenses like the Sony 16mm Fisheye.
Suitable for the Fantasea a6xxx series like a6400, a6500, a6300...
Selling because of a new system. Happy to share example shots!
Consisting of:
Fantasea A6 Domeport
Fantasea Port extention 25
Zoom gear for the 1018 (also fits the 1020 with minimal diy)
All parts are in very good condition and come with accessoires and spare o-rings.
!The dome has been carefully polished once after a scratch!
Price: 450€ + Shipping
Shipping on buyers expense from Europe/ Austria.