Skip to content

Video Gear and Technique / Archived topic

Question about shutter and exposure settings...

Started by Drewski ·

  • 4Posts
  • 4Replies

Read-only discussion

Question about shutter and exposure settings...

4 posts
  1. Hi All:

     

    I've been playing with my VX-2000 some this week, learning the manual functions and I've kind of come up against an issue.

     

    I've been shooting video in my library, a small room, low light, lots of books against one wall. I've MWB against a white wall, and then played with shutter and exposure settings.

     

    Given the light, I was using shutter speeds between 1/30 and 1/100, with gain settings of 0 to 12 dBs. I noticed a number of picture quality "effects" and encountered some "pixelization" of images. I also had difficulty obtaining a "clear" image unless I had a tighter zoom.

     

    Undoubtedly, this is a "newbie" issue, but I'd REALLY appreciate some HELP! Questions:

     

    For "lower light" situations, what is a "good" range for shutter and exposure settings? In this particular room, I dialed the shutter speeds up and down and then set exposures using the zebra stripes set at 70%.

     

    For the above question, depending on settings, how close should I be to subjects to experience well focused images and what is the relationship between the two?

     

    Finally, how much "pixelization" should I expect from the image? I'm using Sony tape, all new, and have run a head cleaning tape twice after I purchased the camera.

     

    Again, THANKS in advance for answers to these questions. An online source of book recommendation would be GREAT if anyone can think of one... :)

     

    Andy

  2. Assuming your camera is NTSC, just leave your shutter on 1/60 (1/50 if you're shooting PAL).

     

    Slower shutter will give you a weird effect. Try waving the camera around with a shutter slower than 1/60 and you will see what I mean. You can get away with a slower shutter speed than 1/60 if you are really struggling for light and have a static shot with no action. I have only used this for static topside night time shots.

     

    As you have access to ND filters, generally do not use a shutter speed faster than 1/60 either. If you need to cut down the light because your iris cannot go smaller then use the ND filters first. Just follow your camera's ND filter prompts. If you have ND2 in and the shot is still overexposed at a small iris then you can go faster than 1/60 with the shutter, but note that you will get a slightly staccato effect (a bit like a paper flip-book) because you're no longer recording all the action. Again in a fairly static shot this doesn't matter but it doesn't look good on something like a juvenile anemonefish wagging its tail fin like crazy. Other situations where you might want to use a fast shutter speed as opposed to ND filters would be if you were shooting deliberately to grab stills, or to do slow-motion in post-production using an interpolation method.

     

    Iris in the middle at about F4 is nice. Very small iris (say F8 to F11) can look poor. A bit of gain is OK but a lot (say >6dB or 9dB) will give grain.

     

    Use can use ND filters and possibly faster shutter speeds to deliberately force a very large iris (say >F2.0) to shorten the depth of field and accentuate your sharp subject against a blurred background.

     

    70% zebra stripes are for skin tones. Use 100% for underwater.

     

    Not sure what would be causing pixellation. Are you sure it's just not noise due to high gain?

     

    You should be able to get well focussed images at any distance once you're past the minimum distance for focussing. If the picture's not sharp then something else is causing that.

     

    Focus is independent of zoom (as far as I know and have experienced). A good practice with manual focussing is to zoom in to do your focus accurately then zoom out again.

     

    Other than small iris = long depth of field and large iris = short depth of field, maybe someone else can chime in with if and how focal length relates to iris, because I don't know and I'd like to.

     

    Haven't found a book that teaches this stuff but here's a bit of reading that touches on these subjects.

  3. Hi Nick!

     

    First, hope you had a GREAT birthday :angry: , I found as I get older they sure seem to come more frequently!

     

    Second, thanks for the detailed reply and information. I spent some time in the pool yesterday using the 1/60 manually set shutter speed with the F settings you recommended and WOW, what a difference. I tried settings from 4 up to 5.6 (?) to see the differences. I noted that as the F setting increased (smaller iris), I did pick up some gain in the image. I switched up to 1/100 shutter, but didn't like the resulting image.

     

    I also kept the camera in automatic focus mode and had better results. My subject was wearing a black drysuit against white walls so I did get some "chop" at the edges in the LCD monitor image, but this disappeared when viewed on SD television. I also noted that image focus was much clearer for detail closer, but lost detail when greater than 3 M away, even with auto focus.

     

    My biggest "learning curve" is the controls on the Gates housing. I've got how they work down pretty well now, but I notice that if I do something "unusual" (like changing shutter speed) I sometimes have difficulty getting things back in position. The "select lever" on the back of the housing for WB and the dial for shutter speed are the most difficult. Somehow I lost the ability to use these at the end of the session yesterday, they must have got slightly out of position and I couldn't quite line them up correctly again.

     

    Anyway, the video I shot yesterday was a HUGE improvement on my previous stuff and I was VERY happy.

     

    THANKS again...

     

    Andy

  4. My biggest "learning curve" is the controls on the Gates housing. I've got how they work down pretty well now, but I notice that if I do something "unusual" (like changing shutter speed) I sometimes have difficulty getting things back in position. The "select lever" on the back of the housing for WB and the dial for shutter speed are the most difficult. Somehow I lost the ability to use these at the end of the session yesterday, they must have got slightly out of position and I couldn't quite line them up correctly again.

    Andy, go back to my post #6 on this thread. The white balance lever is a nightmare without making a stop for it something like that. I moulded it onto that clear plastic window using epoxy filler and I made a spacer to hold the other shaft out of the way. You sacrifice speed of access to the shutter dial but like I say just leave that on 1/60 most of the time anyway.

Aquatica

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.