I am baffled by this. There must be a manual focus knob. Mustn't there?

Hi Nick, I have the knob on the left but it's for the zoom gear if you have the Lumix 7-14mm or the Oly 9-18mm or acting as manual focus for the Leica macro lens.
An illustration is better than thousand words
It's the huge knob up the red lock botton.
Really I could not imagine a better design for a so small camera and housing. As other Nauticam products it's a mechanical engineering masterpiece.

The housing it's very small:

I try to answer to all the others kind people here who replied to my questions... 
I never used the continuos AF. I know that is absolutely useless. I use the single AF. I just half press the shutter button to pre-focus. In my previous test it worked perfectly. Also at 80m deep without light the focus is instantaneous. At the beginning, reading so many comments on AF problem I could not believe how fast and accurate it was.
During the dive I was misleaded from the display. Everything seemed perfectly focused. Prior to shoot toward the blue I pre-focused at some object at a couple of meter in front of me and then using F11 or F13 I thought that everything was ok. I also played some clip in camera during the dive. Only at home I realized the mess 
Probably If I was shooting photos I would have realized it immediately. You can enlarge automatically the photo just after the shot. But with video you cannot enlarge it in camera (Well, I guess. I'll check it at home
)
Later, looking at my dome I realized that the inner part was completely covered by dust. It was my fault and the reason it's another story 
I have some little scratch on the external part but its' really something you can see just observing it toward a strong light. I guess that once in water it shouldn't be visible.
The dive was in a natural resurgence. While entering in the water I had to pass through a thick layer of death green algae. Probably the dome was not well cleaned and it kept some grease and water bubbles. Shooting toward the sun and surface I amplified the problem.
Despite of this inconvenience I was really impressed for the nearly zero banding on the blue water and green algae. I used a magic filter and it was great! I manual white balanced the shots at different depth. At the beginning I tried to WB against the white tanks of my buddy but the tanks were so shining under the sun that the camera refused to WB saying "image too bright to WB"
So I WB against the gray mud of the lake obtaining a nice blue tone. Except for being out of focus most of the clips did not need color grading at all (IMHO).
I hope to test it again in that lake asap. In the meantime on Thursday I will go in a pool to experiment.
I do not pretend to obtain the same results as my buddy with the large Underwave/Igloo glass dome 

I read many threads on acrylic dome cleaning but there are a lot of different opinions. Could you suggest me a good method for a normal cleaning of my Nauticam dome?
If I would try to remove that few nearly invisible scratches which product I could safely use. They aren't deep scratches. I think that the same neoprene nauticam cover cause some little marks on the dome.
Thank you all.