flowdesign

There has a tiny charging board covered by heat shrink tube and silicon rubber, it will have consistent output in 5V, this is one of the model I was testing, but not the final version And this is the final version This was designed for the old sony camera which is using FW50 battery, and now I'm using the new version on my Marelux housing, larger battery and "smart" charigng board

Woo! What a small world, this is my DIY battery pack which was used on Nauticam A7II case, so I assume you are the second owner of my case🤣

Have you tried this snoot in water? I did similar snoot with couple glasses and didn't seal the tube to allow water coming in, even with support by GPT to setup the right focal length with multiple glasses to reduce the light output angle, it could be only 8mm spot at 10cm distance from the snoot, considering the impact of sea water. Everything looks perfect in the air but when I tried it in the real dive, it didn't work as expected, the spot is much bigger and the brightness was also much more lower as what I tested in air.

Hi Isaac, really a nice try with 3D printing. Can you share more details about the material you were using, PETG or Nylon?

Thanks Chris! Will check the the setting combination with MFO-3 in my next dive trip

Thanks Chris, As my typical shooting objects are all tiny critters no larger than 5cm on daylight diving. I have tried full range focus but it took me more time to find and foucs on the certain object, especially for the fast moving ones. So maybe I can still use my previous setup on daylight diving, use SMC-1 instead of MFO-3, but keep MFO-3 attached all the way during the blackwater, and set focus range as infinity?

Hi all, My current setup is Sony A7M4 and Sony 90mm marco (Tarmon 90mm can be borrowed from my friend), since my favorite is macro to super marco then normally I will put the focal range switch on 0.28-0.5m, which can reduce a lots of uncessary focusing move. Now my MFO-3 is on the way, I have already checked the review videos and discussion threads in the forum, but still not so sure what would be the best option for the focal range switch setting. Especially the new Sony 100 marco is also in my wishlist🤣 Let me try to list all the possibilites and please share your experience and suggestions Daylight diving without mfo-3, focal range 0.28-0.5 Daylight diviing with mfo-3, focal range 0.5-infinity or full range? Blackwater diving with mfo-3, focal range 0.5-infinity? Thanks~

Hello guys, Actually I'm the "old" one from Wetpixel, forgot to re-register for quite a while but now it's the right timing to back🤣 Happy to rejoin the group. BR