INON Compatibility with GoPro HERO13 BLACK

INON is pleased to announce that existing INON accessories for HERO12 Black are confirmed compatible with HERO13 Black when housed in its genuine dive housing (Protective Housing).

Existing INON lenses including UFL-G140SD, UCL-G165II SD, UCL-G100 SD, UCL-G55 SD are usable for HERO13 Black as well at the same condition for HERO12 Black.

INON Action Camera Wet Lenses Usage Tips

• INON " SD Front Mask for HERO9 " or " M67 Filter Adapter for HERO9 " doesn't create vignetting underwater even using 8:7 aspect ratio or HyperView which delivers footage in 16:9 aspect ratio by using the full 8:7 sensor (vignetting will be observed on land.).
• When using INON " UFL-G140 SD " " UCL-G165II SD " " UCL-G100 SD " " UCL-G55 SD ", shoot in 4:3 or 16:9 aspect ratio as vignetting will occur in 8:7 or HyperView mode. 
• When using INON UFL-G140 SD lens on HERO13 Black and shooting in 4K 9:16 or 1080p 9:16, the lens hood appears in a clip. Remove the lens hood or use 4:3 or 16:9 shooting mode.

•  Always set camera's Field of View (FOV)/Digital Lenses to [WIDE]. Using [Linear] or [Narrow] won't bring optimal performance of this lens.
   
• When using with HERO11 Black/HERO12 Black/HERO13 Black, shoot in 4:3 or 16:9 aspect ratio as vignetting will occur in 8:7 or HyperView mode.
   
• When shooting 4K 9:16 or 1080p 9:16 with HERO12/HERO13, the lens hood tips will appear in a clip. Remove the lens hood or use 4:3 or 16:9 shooting mode. 
   
• [SuperView™] mode is not recommended. The SuperView™ mode stretches both ends of the image inside the camera to fit into a 16:9 aspect ratio from originally obtained 4:3 aspect ratio image by the camera sensor. Since the edges of the frame are stretched horizontally, attaching a wide-angle lens further stretches the edges of the frame, resulting in an unnatural image.
   
• Set the camera's image stabilization (HyperSmooth) to [Standard], [High], or [On].  Setting to [Off] will cause vignetting in image corners, and [Boost] will crop the image significantly.
   
• The FOV/Digital Lenses setting [Wide] in Photo mode causes vignetting in image corners. 
   
• Since this lens provides ultra wide angle of view, it is recommended to set Spot Meter to [ON] when using external lighting source (LED flashlight etc.). Setting Spot Meter to [OFF] may have washout if the external lighting device aims center of the frame.