Skip to content

ubiquitous226

Members
  • Joined

  • Last visited

  • Country

    Australia
  1. I think that'll work well for anyone else looking to make it, I'll give what I've printed a go as I think it's well within the workable range. If it becomes a bit hard to manage taking it on and off underwater I'll reprint.
  2. And a few more photos, bungees seem to fit fine as-is with hole placement, if there was a reason to make any other changes slightly wider would be probably be perfection but very happy with it. Yes it does slightly bow in, it sits straight after printing, but it's stretching slightly around the base which I now realise I neglected to notice was slightly wider than the top of the shades, and adds about 3mm to the overall diameter. It'll work as I've got it as the TPU stretches. Massive thanks to you, looking forward to testing in practice.
  3. Yeah naturally I didn't think of the hole location so didn't give any details on the shade placement (for the record small shades about 27mm from base and ~70mm wide, taller shades 46mm high and ~110mm wide). It's very close to the right spot, I'll give it a go as is and if I find the bungee knots are interfering with it fitting properly I'll make some new holes. I used translucent TPU 95 so it actually helps to see the hole lineup more easily. In terms of overall fit it is quite snug which is fine above water but not sure how I'll go taking it on/off underwater if I go that way. I'll feedback once I get the chance to test (hopefully next weekend).
  4. Thanks, really appreciate that. Will give it a whirl over the next two days.
  5. I'd love to make a cover for my secondhand WWL-1 that was missing a front cover. I haven't checked out your model yet to see if I can do it myself, but will take a crack on the weekend. Dimensions here for reference, or if the full model isn't accessible. OD: 126mm Shade height: 46mm (ignoring the fastening screws which protrude a further 7mm)
  6. Thanks this is helpful context for the lack of pre-flash cancel on the earlier Apollo strobes. I would have preferred a strobe with Li-ion batteries, although there was some benefit of reusing my strobe batteries in this case. I did look at beam angle, but was satisfied enough with the D3s for what I wanted. Today I got to test them in the water for the first time, but thus far only with the Sony 10-18mm so not yet a proper wide FOV. I did use the diffusers but my initial estimates were I wouldn't need the dome diffusers even for my Tokina 10-17mm, and therefore on the flip side the wider angle of the Apollos wouldn't be that helpful to me - but perhaps there's some enlightenment on my behalf to be had. Dumb question time though - how do you narrow the beam of a strobe outside of something like a snoot?
  7. Yeah it is definitely complicated with different TTL protocols even for cameras from the same manufacturer as far as I understand. I must confess I've never tried TTL, I only use my strobes on manual which I've enjoyed, but then I haven't generally been shooting in rapidly changing conditions. I do largely blame Sony for not offering the control to cancel the pre-flash, but ultimately I have to make the most of what I have - which for now is more than enough for me.
  8. It would be great to get clarity on that for future or other potential buyers for Marelux strobes. Given the Apollo Y's specifically have a pre-flash cancel option, either Marelux have picked up on it or decided it was more important for that market segment (they quote it as making it compatible with "compacts"). On the Backscatter side they would work, but I believe @Nemrod was referring to the lack of normal TTL mode being the frustration as opposed to not being able to deal with pre-flashes. In the end the price I could get the D3s was too good to ignore otherwise I would have put more effort into confirming.
  9. Of course, the Apollo S's were an appealing option to me. The biggest factor was the statement they didn't offer the option for a pre-flash cancel so I'd have to purchase an additional trigger for them, which I'll likely eventually get if I upgrade but right now I'd prefer not to rely on, and I wasn't sure how it would fit in my housing as I also have a third party vacuum setup. The Apollo Y's from what I understand do offer the pre-flash cancel option, the specs show them at a similar GN to my previous strobes and therefore a fair bit lower than the D3s or Ss - as they're new there wasn't a lot of info on how they compare in real life.
  10. Yes it's one of the reasons I posted here to hopefully get some real experiences. I came in leaning towards the Apollo S's, but discovered some limitations I wasn't aware of, and the availability of the YS-D3s at a lower price than I was aware of, and a very simple upgrade from my YS-110a's. I ended up ordering the YS-D3s after spending some time considering the YS-D130Rs and a few secondhand options, but decided I'd keep to the slightly more compact option with only a small premium for new ones as I still think I'm unlikely to go full frame anywhere in the near to medium future. They landed today, just over a week after ordering, and without additional customs which I expected to pay so extra bonus.
  11. Thanks! I had noticed some of your posts around the place. Feel free to PM me if you have any specific questions on the A6400 Salted Line setup as that's what I've been using for a little while now. I own the Tokina 10-17mm but haven't yet shot a bunch with it as I've been enjoying the Sony 10-18mm a lot, when I have taken it underwater I use the Metabones adapter and have 3d printed the zoom gear but managed to break it when I chucked it straight into my camera bag, and have had a friend re-print it, although I wasn't in a rush as I found myself using it most at 10mm anyways. I'm sure you've come across @Barmaglot across many different sites if you've been doing some research, they have some really useful info available too.
  12. Sorry missed this! I went from the Sony A6000 to the A6400, as I had the Salted Line housing I could just change some shims to make it work and I've been very happy with that upgrade. Eventually I'll have to consider if I upgrade the body when I go for a new housing, which will likely depend what I can find secondhand.
  13. Thanks for sharing your experiences, I have seen a lot of issues with the Sea&Sea strobes, particularly the D1 and D2. The lack of service support is the key theme though that I am wary of. The AOI UIS P1 specifically were too heavy to appeal to me, if I was going up to that level I'd look at the Backscatter HF-1 and Marelux Apollo IIIs. I also wasn't clear on their equivalent power, when converted to a GN it was usually quoted as 22, sometimes 28. With Backscatter I considered the Atom which was definitely in the range of what I was looking for.l, albeit a bit less power.
  14. I have no issues at all with secondhand, and I'm not in a rush so I'll keep an eye on what comes up. Being on the west coast of Australia there isn't that much. I wouldn't actually mind if a A6400 housing came up for some additional flexibility on ports, extensions and zoom gears, but at the same time it wouldn't change that much for my photos. Longer term I am not stuck on Sony, Nauticam or full frame, but there are some advantages to availability for all so I'll just wait and see. The info on strobes was very helpful for me, I'll be keeping an eye on the general equipment threads too for some ideas on future upgrades.
  15. I had an Olympus OMD EM10 original before I changed to Sony A6000 as I lost it while overseas, and the Sony was the next best option. Loved that camera! The mkIV and the AOI housing would probably be my pick for an entry level system if starting from scratch, got to see one in action at the Rowley Shoals and it was a good little system.
WaterPixels Store

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.