FrancoisC

I have some PLA parts outside in garden (not for underwater use) ok since several years. The most "dangerous" thing is the inside of a car under direct sunlight. There PLA will start to deform. No issue with TPU, don't remember having tested with PETG

to come back to AA vs Lithium discussion: I have 2 ProX initialy without extender. Very frustrating because most of the time with 2 subsequent shots, the second one was not lighted. I added battery extenders ($$$), and issue was no longer there, but -good, but not exceptional recycle time. -with the cost of higher overall length (not critical) -more manipulation with a total of 8 O-ring. With some time to time difficulties to insert extenders. -many batteries. 2 sets of 16 AA (because in some situations you don't have time of possibility to recharge, especially with 3 dives per day. With lithium batteries, I expect -better capacity : it sems ok. Enough for 3 dives ? -bette recycle time : not sure how it compares to Pro X...

Done some tests with various settings, and it seems that the easiest way to identify the S-Macro position is the "Max aperture" exif tag, with a value of 5.0 at S-Macro and 3,6 for others. I will try to find some time to post more details

Thanks Chris. I will make some tests to see how values are changing.

Hello does someone know if this is possible to see in EXIF or other what was the position of the focus limiter switch ? S-Macro, 0,25-0,50, 0,25-∞ Ideally in Lightroom. I check also OM Worspace and Image-Exiftool tool, but did not thing anything relevant...

Having already tried RRM outside water, I can imagine the headhache 🙂 yes, eyes are the most interessant. Taken with the 70D or the R7 ? I think I have already see some of the picures...

A little bit more than 800$ for a pair (50$ saving for each if you order before 8th of July). This is not cheap, but if you compare with the price of empty 4 to 8 AA booster... It's double the battery life, so you can probably dive 1 day with only 2 packs instead of 32 AA... But recycle time is only 10% better. Expect more for a Li-Ion strobe.... And I love (or not...) the sentence "NOTE: The USB-C charging cable is not included with the Retra Power Vault."

Hi JB did you set your Z330 to ignore the preflash ? small button on right. Push or pull, I do not remember...

I wonder if FLEX/TPU is less prone to have water going inside...

Seen issue with the salt deposit on the glass. I was clearly able to see the mesh pattern of the neoprene cover on the glass. This disappear with cerium oxyde cleaning (my glass had no coating, so it is not a problem) Now, I use the neoprene cover during the dive for protection, and have a hard cover used afterward.

I use same kind of 4mm cable with EM1 mk2 and FL-LM3 triggering Retra Pro-X It works alse very well.

With EM1-mk2 I use Oly 8mm also behind Zen DP170 dome and IQ is very good. I also have the Pana 7-14 behind the same dome with an extension, and previously behind a Nauticam 6" dome, but in both cases quality is not as good than 8mm with Zen dome, and the 7-14 ens is prone to flare. No longer used it since several years...

Well known picture of seahorse with ear bud from Justin Hofman seems to be legit....

Be aware that neoprene cover can leave some traces on the port if not completely dry. I have made a 3d printed flex cover for my dome port. The glass is not touching the cover. But it is a little bit to bulky to keep it with me while diving...

I have done some tests in the pool. Tested, Subsee +5, Saga +10, SMC1, Noodilab. Compared to X2 S-macro mode, I could get for some of them nearly same magnification, but in all cases with the cost of a reduce working distance. No benefit at all. A sample of result with the 90mm lens alone in X2 S-macro mode. Working distance is around 4-5 cm. This is the head of a Lego minifig. Width is around 10mm, filling the frame with no crop. Not so bad... null

I had 4 YSD1, and 3 are dead due to tube failure...

Hi Bill. I tested with a Saga +10 and a Noodilab Moby, but with no benefits. Basically no better magnification, but very short working distance. I still have to test with my wife's Subsee+5 As previously written I already have to master the lens w/o additions...

I have done tests with 10 meters fiber without any noticeable change.

Thanks Chris. not sure I will be able to do some tests, needing to find a 17mm extention ring... Anyway I have first to try to get some good results without TC. From my first tests (in pool), it seems a 1cm subject will fill the whole image in S-macro mode... Trip to Alor, Indonesia planned for June and weanwhile in fresh water at La Gravière du Fort, Alsace France. Will post images (If I can get good ones 🙂 )

A friend of mine is using a Nikon D7200 with Nikon SB800 strobes in homemade housings. Some infos here (this is in french, but there are some pictures 🙂 ) https://www.forum-photosub.fr/forum/viewtopic.php?p=224459

Hi, I have an Olympus EM1 mkII with an Olympus 90mm macro lens. In a Nauticam housing with N85 Macro Port 120 dedicated part. Does anyone try this with the 1,4x teleconverter and N85 Extention Ring 17 (as specified in port chart) ? in which mode in the lens ? Normal, 2x (S-macro) ? Any input will be welcome 🙂

We were flying to La Paz through Mexico in 2015. I had a second body (used as backup and for land pictures), and at customs they tried to consider me as a pro due this second body (probably for taxes...). Honestly, we will probably no longer go there till this racket occurs... With both of us having underwater setup, risk is too high.

TPU can also be a good choice for this kind of connectors.

We have Sony 16-35 f/2,8 in Nauticam 180mm dome (with A7R2). As Interceptor121 pointed out, WWL is near 16-35 at wide side, even if second one is rectilinear. Has someone doing some comparison between both setup ?

I have the Pana 7-14, previously on an EM-1 mk1, now on mk2. In the beginning with Nauticam 6" dome and now with Zen dome. And yes, purple fringing are not rare with the sun in front or front side. Not strobe lighting issue. See attached picture for example.null I now mostly use my Oly 8mm instead.