Jump to content

Recommandation gear EPL-10


sacha

Recommended Posts

Hi All,

I currently own an ikelite housing with a Nikon D750 but have unfortunately realized that it is too big for me (I only dive on travel and I tend to combine my dives with other activities). 
On top of that I hate using the optical visor underwater, I find it extremely small and I don't understand how people use this. I guess I could buy a magnified viewfinder but all the housings I have seen online are sold without one. Are all these people shooting without a viewfinder ? Sorry I'm digressing a bit here ...

Because of my budget and my needs, I have been looking into a used EPL-10. I was interested in the backscatter package but I haven't seen any used one sold where I live.

I found another one that seems to have a lot of accessories that would be relevant to me but most of those are different brands than the one sold by backscatter. I'm wondering if these make sense or not ?
 

  • Close up lens : The close up lens sold with it is the Nauticam CMC. Different than the AOI one but I read a lot of good things about it, so I guess that is fine.
  • Wet wide lens : It is sold with a WeeFine WFL01. I guess the biggest issue about that one is that it can cover 24mm FF equivalent but the olympus 14-42 that always seems to be the lens used on this setup is a 28mm equivalent. So you end up with a wet lens which is much bigger and heavier than the AOI one sold by backscatter for no added value. I'm not sure how their quality compares either.
  • Strobes : The camera is sold with two ikelite DS51. This is the strangest part to me. It seems to me that ikelite strobe works well with Ikelite housings but that people using other housings tend to use other brands. What kind of disadvantages might I expect there ? I guess there will be no TTL but it is not clear to me if the EPL-10 can have TTL with other strobes ?
     

Please let me know what you think of this package and if you have any suggestion of parts I should swap or add if I get it. Thanks ! 

  • Like 1
Link to comment
Share on other sites

I suspect the wetlenses would be fine, the WFL-01 says it's designed for the m43 sensor.

 

The DS-51 strobes are wire triggered as I understand it you would need to ask how they are triggering the strobes.   The AOI EPL-10 housing has a built in LED trigger and to use this you would need a optical to electronic trigger converter.  The LED trigger in the EPL-10 housing is manual only if I recall correctly and the design of the housing would make it difficult to use a third party trigger to get TTL. 

 

So with this setup you take the electric signal ex the hot shoe convert it to optical with the LED trigger then have the opto-electric converter turn it back into an electrical signal.  You need to maintain both these items plus the o-rings on the trigger cables.

 

If you definitely wanted TTL you might have to look into a housing for an EM-5 III, OM-5 or similar.  The AOI housings for those use the small accessory flash that comes with the camera to trigger and that is capable of TTL.  AOI OM system housings are here:

 

https://www.aoi-uw.com/products/housings.html

 

the AOI housings don't have a optical viewfinder installed and you need to use the Rear LED monitor.  On the topic of viewfinders, for many years I used the standard viewfinder in my Nauticam housing, you needed it right up against your mask but it was usable and you could tell if the camera had grabbed focus generally.

  • Like 1
Link to comment
Share on other sites

4 hours ago, sacha said:

Hi All,

I currently own an ikelite housing with a Nikon D750 but have unfortunately realized that it is too big for me (I only dive on travel and I tend to combine my dives with other activities). 
On top of that I hate using the optical visor underwater, I find it extremely small and I don't understand how people use this. I guess I could buy a magnified viewfinder but all the housings I have seen online are sold without one. Are all these people shooting without a viewfinder ? Sorry I'm digressing a bit here ...

 

Hi @sacha. The big questions always seem to come down to 1) how obsessed are you with making photos or videos, 2) what's the least in terms of quality can you tolerate, and 3) how much money do you want to spend? I'm not familiar with the D750 or any of Nikon's DSLRs (I last used an FM, FM2, F3, F4). Many DSLRs were shit for live view on the monitor, so using the optical viewfinder was necessary. The newer mirrorless cameras have good monitors, and you can compose and shoot with these, but they are still very small.

 

5 hours ago, sacha said:

Because of my budget and my needs, I have been looking into a used EPL-10. I was interested in the backscatter package but I haven't seen any used one sold where I live.

 

The Olympus system is very good. You can make a very compact system with that, and I regret the day I sold my Olympus OM-D EM-1 mark II. The lenses are very small, and the system is quite portable.

 

5 hours ago, sacha said:

 

  • Close up lens : The close up lens sold with it is the Nauticam CMC. Different than the AOI one but I read a lot of good things about it, so I guess that is fine.

 

If you're not a macro shooter you can get some magnification but not 1:1 with wet lenses like the Nauticam CMC-1 or 2. The 2 doesn't give as much magnification but is easier to shoot because it allows more working distance from your small subject. Nauticam is very good in my opinion, but there are other lenses you can look at such as Inon, AOI, Kraken. I've used the Inon 165, and stacked them, which works okay. If you love macro the Olympus 60mm is very small and very portable.

 

5 hours ago, sacha said:

 

  • Wet wide lens : It is sold with a WeeFine WFL01. I guess the biggest issue about that one is that it can cover 24mm FF equivalent but the Olympus 14-42 that always seems to be the lens used on this setup is a 28mm equivalent. So you end up with a wet lens which is much bigger and heavier than the AOI one sold by Backscatter for no added value. I'm not sure how their quality compares either.

 

I don't have any personal experience with the WeeFine WFL01. It should work with the 14-42mm. I use a Nauticam WWL-1 and it works with several different lenses, including the Olympus 14-42mm. The WWL-1 and other wet lenses can be pretty heavy, yes, and require flotation offsets. The best part of taking wet lenses, though, is that your traveling kit may be less bulky. Dense like lead, but less bulky.

 

5 hours ago, sacha said:
  • Strobes : The camera is sold with two ikelite DS51. This is the strangest part to me. It seems to me that ikelite strobe works well with Ikelite housings but that people using other housings tend to use other brands. What kind of disadvantages might I expect there ? I guess there will be no TTL but it is not clear to me if the EPL-10 can have TTL with other strobes ?

 

I used Ikelite for several years, and found their strobes to be pretty nice. A good amount of power with warm soft light. I did have a DS-51, but didn't like it. Strangely, it was very loud underwater. There are smaller and better strobes available now, including Backscatter's MF-2 (which can shoot TTL with Olympus cameras), Inon and Sea & Sea. The Ikelites will most likely used wired cords, but I think many photographers prefer fiber optic cables, which are durable and long-lasting despite their fragile appearance.

Link to comment
Share on other sites

8 hours ago, Chris Ross said:

If you definitely wanted TTL you might have to look into a housing for an EM-5 III, OM-5 or similar.  The AOI housings for those use the small accessory flash that comes with the camera to trigger and that is capable of TTL.  AOI OM system housings are here:

 

https://www.aoi-uw.com/products/housings.html

 


Thank you but based on my budget I'll take what I find used so I guess I'll start without TTL. From what I read online, in a lot of situations it is still recommended to shoot without it no ?
 

8 hours ago, Chris Ross said:

the AOI housings don't have a optical viewfinder installed and you need to use the Rear LED monitor.  On the topic of viewfinders, for many years I used the standard viewfinder in my Nauticam housing, you needed it right up against your mask but it was usable and you could tell if the camera had grabbed focus generally.


I just find it very hard to compose with this poor view, and I also found it very hard to make sure my focus was right.
I also find it much harder to have an idea of my distance to the subject and I'm always worried to get too close and touch it. 
I hope that using the screen will solve these issues.

 

 

8 hours ago, humu9679 said:

 

Hi @sacha. The big questions always seem to come down to 1) how obsessed are you with making photos or videos, 2) what's the least in terms of quality can you tolerate, and 3) how much money do you want to spend? I'm not familiar with the D750 or any of Nikon's DSLRs (I last used an FM, FM2, F3, F4). Many DSLRs were shit for live view on the monitor, so using the optical viewfinder was necessary. The newer mirrorless cameras have good monitors, and you can compose and shoot with these, but they are still very small.

Videos are a plus but I don't care too much about it. It is mainly the small size which speaks to me.
Newer mirorless cameras look much smaller indeed and very good but they are unfortunately out of my budget 😕
 

Link to comment
Share on other sites

I don't really get how the multi quote functionality works yet so starting a new answer 🙂 

 

Quote

I used Ikelite for several years, and found their strobes to be pretty nice. A good amount of power with warm soft light. I did have a DS-51, but didn't like it. Strangely, it was very loud underwater. There are smaller and better strobes available now, including Backscatter's MF-2 (which can shoot TTL with Olympus cameras), Inon and Sea & Sea. The Ikelites will most likely used wired cords, but I think many photographers prefer fiber optic cables, which are durable and long-lasting despite their fragile appearance.

 

Would the MF-2 also work for wide angles shots (I understand it would not be the ideal solution but would it work as a DS51 replacement) ?

I'm thinking of taking a video light and a strobe light with me on holidays to keep it as light as I can but still flexible.



 

  • Like 1
Link to comment
Share on other sites

3 hours ago, sacha said:

I don't really get how the multi quote functionality works yet so starting a new answer 🙂 
 

 

I just repeat the quote and edit the section I want to highlight, then I repeat it.

 

3 hours ago, sacha said:

 

Would the MF-2 also work for wide angles shots (I understand it would not be the ideal solution but would it work as a DS51 replacement) ?
 

 

The MF series flashes will definitely work as replacements for the DS-51. They are triggered via fiber optics, and I have found fiber optics to be durable and long-lasting. The MF series may not be great for wide angle, but you can make it work. There are better wide angle strobes out there with good power and quality of light.

 

3 hours ago, sacha said:


I'm thinking of taking a video light and a strobe light with me on holidays to keep it as light as I can but still flexible.
 

 

The MF series flashes have pretty good focus lights, which can double as macro video lights. I think a good light kit would be an MF-2 with a Backscatter 4300 video light. Or two MF-2s, if you're mainly interested in photos.

  • Like 1
Link to comment
Share on other sites

So I ended up biting the bullet and buying the kit I mentioned above 🙂 Hoping to take a lot of great pictures with it !

 

On 10/3/2024 at 6:03 AM, Chris Ross said:

The DS-51 strobes are wire triggered as I understand it you would need to ask how they are triggering the strobes.   The AOI EPL-10 housing has a built in LED trigger and to use this you would need a optical to electronic trigger converter.  The LED trigger in the EPL-10 housing is manual only if I recall correctly and the design of the housing would make it difficult to use a third party trigger to get TTL. 

 

So with this setup you take the electric signal ex the hot shoe convert it to optical with the LED trigger then have the opto-electric converter turn it back into an electrical signal.  You need to maintain both these items plus the o-rings on the trigger cables.


Indeed you were right, this is coming with ikelite fiber optic convertors : https://www.ikelite.com/products/fiber-optic-converter-for-ds-strobes-3rd-gen?

 

23 hours ago, humu9679 said:

The MF series flashes have pretty good focus lights, which can double as macro video lights. I think a good light kit would be an MF-2 with a Backscatter 4300 video light. Or two MF-2s, if you're mainly interested in photos.


These backscatter 4300 look incredible. The pack I got came with Hugyfot Arius 1500 which seemed bright enough outside of the water but looking now, are only 1500 lumens.
But it seems to be impossible to find the backscatter's weight anywhere.

Now that I have the whole kit, I need to check how to make it as compact as I can. The housing and wet lenses are compact enough but unfortunately arms and strobes are just as big as for a normal DSLR 😛

Edited by sacha
  • Like 2
Link to comment
Share on other sites

Hi Sasha, hope you like your new set-up. I previously had the EPL-10 in the AOI housing. It is a great system. If you expand it the 60mm macro lens is great and used copies easy to find. For the housing the magnifier that shades and enlarges the rear LCD also can be useful.

 

For the wet-lens, I think that one goes to 145 degrees angle of view with a 24mm so you will need to zoom in a bit to avoid vignetting at it's widest, but the AOI UWL400A, also sold as Backscatter, is 120 degree at its widest. I think the Weefine/AOI quality is probably similar. I have had a couple of wet-lens and the ones with the polycarbonate front dome need to be used very carefully. They can focus very close and despite the marketing the dome is not very very scratch resistant, so touching something easily makes a mark. Whereas normal polycarbonate dome ports can be polished, these wet lens without glass front elements have coatings so scratches can't be polished. 

 

If you want to get a smaller set up with TTL you could look out for used Inon S2000. 

Link to comment
Share on other sites

  • Thanks for your support

    Logo Logo
    Logo Logo
    Logo Logo
    Logo Logo
    Logo Logo
    Logo Logo
    Logo Logo
    Logo Logo
    Logo Logo

     

     

     

     

×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.