waso

Thanks so far, Wolfgang! I just noticed, though, that the HF-1 with TTL only supports Sony and OM systems, and a Nauticam TTL converter doesn't work with backscatter strobes. I have no idea if there are any good third-party converters available – I haven't had to look into that before. I'd have the same TTL problem with the Backscatter Mini, of course. Regarding the Retra Maxi, I've read that it has plenty of power but very cold light (6000K). There's a diffuser available, of course, but how bright is it then?

Warning, long text! I know, it's probably the hundredth strobe question on this forum... A brief history of my strobe equipment: From 2005: 1x Sea&Sea YS-60 From 2009: 2x Inon Z-220 From 2011: 3x Sea&Sea YS-110a From 2014: 2x Seacam 250D From 2022: 2x Seacam 150D The Seacam 250D strobes were by far the best I've ever owned. Two flash tubes - one very large with very warm, soft light for wide-angle photography (even without a diffuser) and a significantly smaller one with cooler light for macro and snoot photography - perfect! Add to that a TTL that worked almost flawlessly with the Canon 5D Mark III and 5D Mark IV, and lots of power. However, the strobes also had two major drawbacks: they were, of course, large and heavy (due to their 250Ws output) and even more problematic: the battery wasn't user-replaceable. Anyway, I switched to the Seacam 150D, not least because of the carry-on weight restrictions on airplanes, and was considerably less satisfied overall - apart from the size and weight. Since I've just switched my entire system from Seacam to Nauticam, and I was never truly happy with the 150D's TTL performance on the R5 anyway, I'm selling these strobes. Now I'm faced with the question of how best to replace it. Since I often take backlit shots with the fisheye lens, the 150Ws of the 150D was often insufficient for me – I was spoiled by my old 250D. Unfortunately, there aren't many current alternatives that offer warm light, a wide beam angle, and high flash output. I had actually already decided on the Ikelite DS230/232, as these, together with the Ikelite TTL converter, supposedly provide very reliable TTL and have decent power. Although I've always used manual flash for wide-angle shots, I often use TTL for macro photography. I'm also a bit skeptical about flash output in Ws - that's surely only half the story. I don't know of any website that shows comprehensive A/B comparisons of the flash output of current strobes, although I have seen the comparisons by DreiFish and Kiliii Yuan. Since 2010, I've frequently used snoots for macro photography, so at some point I bought the Retra LSD with the corresponding mounting adapter for my Sea&Sea 110a and all my other strobes. I actually wanted to continue using the Retra LSD, but there's no longer a mounting adapter available for Ikelite. The Ikelite DS230/232 strobes have another disadvantage: I can only control them electrically, not optically. I'm now mentally preparing to buy two Backscatter Mini strobes for macro photography. They seem to have enough power for that and I can use a snoot and color filters. In that case, however, I would still need two more strobes for wide-angle. Now my question to you: What would you do in my situation? Is there a strobe on the market that has more power, a warmer color temperature, and at least as wide a beam angle as the Seacam 150D, and can also be used for macro photography (with a snoot!)? Or will I have to buy four strobes after all, and even then I still wouldn't know which ones would be best for wide-angle? All hints and advices are welcome!

Hi and thanks for the welcome, @humu9679 !!!

Hi Michael, Thanx!!! Mehr und mehr ex-uwpixler... 😁 Hi @Landvogt1893 !

Hi Hi @CaolIla , greetings across the border!!!

Hi Jens, It's quite sad, actually – although the forum isn't completely dead, the traffic is practically non existent. I think social media has ultimately led to the decline in activity on uwpix – and an internationally oriented forum is obviously more practical. But I already have spotted a few forum members here. 😉

I don't know how you set your focus point... If you can track that using a software, it would be obviously helpful. But if you used a relatively small aperture and the focus point is somewhere on the subject, it shouldn't be a problem to assess the image quality in any case. In underwater wide-angle photography, the edges of the image, and especially the corners, are always problematic in terms of sharpness due to the laws of physics. Therefore, it is a constant struggle for underwater photographers to assemble a camera system that overcomes these physical limitations.😁

Yes, exactly! If you take a look at page 1 of this thread, I already posted some images in standard web size and 100% crops from the corners.

Thanks for the pictures! Do you know if they were all taken at the minimum focal length? Can you use the 24mm lens without vignetting? Could you perhaps show 100% crops from the relevant corners?

Sold!!!

Thanks for your statement. Would you mind showing some images with crops from the corners?

Is it possible to get 100% crops from the corners (as I posted with my images above)? It would probably be interesting not only for me.

Sold!!!

No decision yet. Right now I'm busy selling off the remaining Seacam equipment and a few Nauticam items, ordering the Commlite adapter and then testing it in comparison with the Kenko on my 8-15. Personally, I'm not interested in a rectilinear wide-angle lens behind the dome as the optical quality has simply been too poor in my experience. If you have sample shots and 100% crops from the corners with your RF 24-50/WWL-C, it would be nice to have a look.

Almost 20 years ago, I used a similar setup with a Sigma 150/2.8 and an expensive Raynox in the Philippines. The image quality was 'okay' (compared to today's Nauticam SMC-1/2), but you could only photograph very small objects with the internal close-up lens, making it extremely limited in its versatility. I definitely wouldn't recommend it.

I'm selling a Seacam zoom ring for the Canon EF 8-15/4 fisheye lens including a Kenko 1.4x teleconverter. Very good condition, fully functional. Shipping from Germany. As this is a private sale, the item is sold without any warranty, guarantee, or warranty. Liability for damages resulting from injury to health, body, or life, and for gross negligence and/or willful misconduct on my part as the seller, remains unaffected.

I'm selling a Nauticam 70mm extension ring (N120) for a 120mm port diameter (SKU # 21170). Fully functional, but with a few scratches (see photos). Shipping from Germany. As this is a private sale, the item is sold without any warranty, guarantee, or warranty. Liability for damages resulting from injury to health, body, or life, and for gross negligence and/or willful misconduct on my part as the seller, remains unaffected.

I'm selling a Nauticam acrylic dome port (SKU # 18802), size 8.5", for the N120 port diameter, including neoprene protection. The glass is absolutely scratch-free and the whole dome port shows only minimal signs of use. Shipping from Germany. As this is a private sale, the item is sold without any warranty, guarantee, or warranty. Liability for damages resulting from injury to health, body, or life, and for gross negligence and/or willful misconduct on my part as the seller, remains unaffected.

I've been using these float arms from Mike-Dive (whom you might remember from the past) on my macro port for many years and I'm very happy with them. Even shooting on the sea floor (which I prefer anyway) isn't a problem, as I simply remove two of the floating elements and position the resulting gap at the bottom.

Ok, but are you sure you want to use a wetdiopter permanently? This means you forfeit the possibility of using the macro lens without a wetdiopter. I personally wouldn't want to do without it.

The opposite is true for me: If I would attach and remove the heavy close-up lenses, my system would change the balance every time.

Can't you attach a flip adapter to your macro port? That makes using wet close-up lenses much more convenient, safer, and faster.

Thanks for the link! It will provide me with good entertainment for this evening. 😁

Actually, the WWL was never on my shopping list. Before I started this thread, I was almost sure to buy a WACP-C.🫢 After Christmas, I will first buy and modify the Commlite RF/EF adapter to determine how big the IQ difference is compared to the older Kenko and after that, I'll probably buy the 140mm FE Port.

Thanks, this link works. Actually, I was already reading the whole thread a few days ago (before I started this thread).