Hi after the technical problem I had during the first attempt I start a second time (Thanks again to @RichN for the help )

I make a model with Autodesk 3D Fusion

the same

As you can see I have 3 green parts
1 for double fiber

2 for single fiber but with 2 different diameter

Do you have a real photo?

Some strobes like Retra really require a 90deg connector.

Yes yes it's comming.. I needed to restart my PC (sometimes when it don't want...;) The Onedrive sync had a problem.

Yes I know with Retra I show you an other connecter for it

Mounted on my Isotta housing

here at the Retra side

Edited 1 hour ago1 hr by CaolIla

I ve no time for more info over the Retra connector now but will give you more details if you want later

If someone want the 3D STL file for the connector ask.


I fogot to say to part are printed with TPU only the bolt is in PETG.
It is easy and fast to mount and unmount It is a very important point in my setup then the fiber is going throug the arms.. The idea is to protect a maximum the cable

I hope this give you some ideas

29 minutes ago, Dave_Hicks said:

Do you have a real photo?

Some strobes like Retra really require a 90deg connector.

You can see it's not a 90° connector but a 180 ° ;)