For 16 AA batterie

 

 

 

If you want the STL file please MP

Edited March 26Mar 26 by CaolIla

Hello everyone,

Since my used Nauticam WWL-1 lens didn't come with a back cap, I made a suitable one. It also works for the bayonet mount. I hope someone can use this.

https://makerworld.com/en/models/1346497-rear-cover-for-nauticam-wwl-1-bajonet-mount#profileId-1388138

Greetings from Switzerland,

Tino

I've been using the Nauticam MFO-1 lens for a few weeks and decided to fit it out with a Lens Hood and Cap to protect it from damage while in use and in storage. My previous close-up diopters took a beating over time, and I wanted to do better with the MFO. I've used it on a handful of dives and it works great. The hood is rubber so if you pump a rock, it won't break and just acts as a bumper protecting the glass and body. It can also help reduce lens flare from your strobes.

The Hood is printed with TPU rubber and slips tightly over the MFO-1. The Nauticam provided cap won't work when the hood is installed, so I made a cap as well. Both soft TPU and hard PETG versions of the cap are available.

Note: These will work with the Nauticam SMC and CMC lenses as well.

https://makerworld.com/en/models/1320540-shade-cap-for-nauticam-mfo-smc-close-up-lens#profileId-1356631

On 3/1/2025 at 7:04 PM, Robin.snapshots said:

60mm to 70mm float arm adapter for Nauticam accessory:

.

 

I recently got a mount for a nauticam bayonet on a 70mm float arm. I didn't want to upgrade my float arms to the nauticam ones so I made a simple adapter to mount it on a generic 60mm float arm.

 

Printed in TPU, printing with 5 perimeters worked well for me.

 

Nauticam bayonet 70mm to 60mm float arm adapter.stl

I only see this post now. I made similar a support for the Inon lens UCL-G100 SD and/or UCL-G55 SD

if some one need it... please reply and ask.
I will post the 3D STL file here