I'm on a dive trip at the moment. Prior to leaving, I did the firmware update at home on my pair of Pro Max 1.
I just noticed on the camera bench that the displays are opposite on each strobe.

I do not feel there are strobe "issues" - just wondered if other folks had experienced similar and what might be the reason.

Edited 7 hours ago7 hr by DocTock

Hi

1 hour ago, DocTock said:

I'm on a dive trip at the moment. Prior to leaving, I did the firmware update at home on my pair of Pro Max 1.
I just noticed on the camera bench that the displays are opposite on each strobe.

I do not feel there are strobe "issues" - just wondered if other's had experienced similar and what might be the reason.

I had the same "problem"

They are a way to change the orientation but... humm I can't remember how I did that...

I've found the mail I received from the Retra support last november

For the rotated display, simply turn the dial to the SOS/TURN position. This will turn (rotate) the display, and the strobe will remember the orientation even after being powered off.

Best regards

Matija S.

Thanks!

I knew it was nothing "wrong" and appreciate the "fix"!

Ahhhhh, I’ve been there too. I felt so daft when I was told the fix. Doh! 🤣