canon8-15+TC1.4+metabones

June 26, 20242 yr

canon8-15→TC1.4→metabones→camera

canon8-15→metabones→TC1.4→camera

Is there a difference between these two installations? Which one is better?

June 26, 20242 yr

The normal way it is done is the Canon 8-15 with a Canon Mount Kenko converter. It has been reported that a Sony 1.4x with Metabones then the 8-15 also works well. The Metabones acts as an extension tube in this setup and the field of view obtained may be different. If I recall correctly a certain version of metabones was needed with a large enough diameter to accept the nosepiece on the Sony 1.4x.

June 26, 20242 yr

Not exactly what @boduoguo asked, but this might be of some help:

Share on Facebook

Followers

Go to topic listing

Add your photos to this month's
Members Showcase

Backscatter Nauticam MFO-1, MFO-3, & SMC-3 Underwater Macro Lens Review
Backscatter Nauticam MFO-1, MFO-3, & SMC-3 Underwater Macro Lens Review

RichN · Thursday at 07:53 PM1 day

James Emery at Backscatter has published a review and a field video of three Nauticam wet lenses that mount on the same macro port: the MFO-1, the SMC-3, and the MFO-3II. All three are 67mm lenses, so on a flip holder you can move among them on one dive without changing the camera lens. They do different jobs. The MFO-1 is the everyday optic: a little magnification, and a shorter focus range so autofocus stops hunting the water column. The SMC-3 is the super-macro lens, about 2.3:1, for the sma
RichN

Thursday at 07:53 PM1 day

RichN

Thursday at 07:53 PM1 day
- 0 comments
- 180 views
Adobe Lightroom Classic 15.6
Adobe Lightroom Classic 15.6

TimG · October 12Oct 12

Slightly late news, but another update is available for LR Classic - version 15.6 The Adobe Community reports that: "What’s New The September 2026 release of Lightroom Classic v15.6 brings meaningful improvements designed to make photo editing faster and more precise. The standout enhancement is Reflection Removal, which now delivers cleaner results when removing reflections from windows, glass surfaces, and even water. The updated technology reduces smudges and ghosting artifacts, helping pho
TimG

October 12Oct 12

TimG

Thursday at 05:41 AM2 days
- 1 comment
- 1,037 views
Cozumel Officials Clarify Customs Treatment of Dive Computers and Underwater Camera Housings
Cozumel Officials Clarify Customs Treatment of Dive Computers and Underwater Camera Housings

RichN · September 21Sep 21

Underwater camera housings traveling with their corresponding cameras are to be treated as photographic accessories, while dive computers are to be classified as sporting equipment, according to Cozumel tourism officials following meetings with Mexican Customs. Broader questions about strobes, ports, wet lenses and whether the interpretation applies throughout Mexico remain unresolved. September 21, 2026 — WaterPixels There may finally be some movement in the long-running dispute over how Mexi
RichN

September 21Sep 21

Hilljo88

October 15Oct 15
- 3 comments
- 1,872 views
INON Releases ZD Front Mask for GoPro MISSION 1
INON Releases ZD Front Mask for GoPro MISSION 1

RichN · September 18Sep 18

INON has released the new ZD Front Mask for MISSION 1, providing support for a range of INON ZD-mount wide-angle and close-up lenses when using the GoPro MISSION 1 with its official Protective Housing. INON Inc. has announced the release of the ZD Front Mask for MISSION 1 on September 18, 2026. The new front mask is designed specifically for the GoPro Protective Housing (MISSION 1 series) AGDIV-001. INON has also released the ZD Front Mask for MISSION 1 Grip Set, which combines the new front m
RichN

September 18Sep 18

Nando Diver

October 15Oct 15
- 2 comments
- 922 views
WaterPixels’ Next Chapter: Community Focused. Industry Supported.
WaterPixels’ Next Chapter: Community Focused. Industry Supported.

RichN · October 17Oct 17

Expanding our media coverage, celebrating members’ work, and keeping the community at the heart of what comes next. By Rich Newberger A photograph that makes you stop and look. A useful answer to a question you have been struggling with. A conversation that introduces you to someone who shares your enthusiasm for the underwater world. These are the things I want us to keep in mind as WaterPixels grows. As a longtime diver and underwater photographer, I value the friendships, shared knowledge,
RichN

October 17Oct 17

RichN

October 17Oct 17
- 0 comments
- 206 views
UWT Trigger for Nauticam/OM System OM-1
UWT Trigger for Nauticam/OM System OM-1

TimG · August 8Aug 8

Having recently written about installing the o-Turtle trigger into a Nauticam housing, I’ve now had a go with a UWT internal trigger for the Nauticam NA-OM1 housing. UWT describes it as the 11072-22-HSS TTL-Converter for NAUTICAM for OLYMPUS/ OM SYSTEM. The UWT trigger arrives in a bubble-wrap envelope in a small cardboard box. No frills functional. It consists of a small electronics board with two LEDs and a cable leading to a hot shoe connector. The manual explains that strobes are selected
TimG

August 8Aug 8

JMC22

October 13Oct 13
- 5 comments
- 1,394 views