Tino Dietsche

Hello everyone, I'm currently dealing with the topic of Sony 28-60 kit lenses with a Nauticam WWL-1 and one or two questions come up. According to my research, the WWL-1 is basically compatible with different housings or ports. I think the WWL-1B only works with Nauticam ports? Is that correct? What are your experiences with the WWL-1 with ports and housings that do not come from Nauticam? e.g. Ikelite, Seafrogs etc.? Are there any problems, tips and tricks that you should be aware of? What recommendations do you have regarding bayonet systems? A colleague just bought a new case from Seafrogs for the Sony A7C with 28-60. How would you attach a WWL-1 there? Or are there even alternatives to the WWL-1 that we could look at? Thanks for your feedback, Tino

Hello everyone, I'm thinking about whether I should complement my current setup with the 28-60, or whether I should replace my current wide-angle setup. I currently use the Sony 16-35mm F4 with the 180mm glass dome from Nauticam for wide angle on my Sony A7III. For macro I use the Sony FE 90mm Macro with the corresponding port. Basically, I'm happy with the solution, but there are often situations and dives where a more flexible solution would be absolutely exciting. I'm therefore considering whether I should sell the Nauticam Dome port and buy the port for the 28-60mm instead. Plus a WWL-1 or WWL-1B. For minimal macro shots I would have a Weefine WFL05S. And for dives where I really want full macro quality, I can still use the 90mm. What do you think about the considerations? I'm flying to the Red Sea again in May after a long time and think that the 28-60 combination offers more flexibility. In terms of quality, the differences in the wide-angle range shouldn't be that extreme when using a WWL-1, or am I mistaken? For macro there is certainly a certain difference in quality between the 28-60 and an attachment lens compared to the 90mm macro. What certainly also speaks for the 28-60mm setup is the transport volume. I'm curious about your opinions and feedback. Greetings from Switzerland, Tino

I use a 5" monitor from Feelworld in a custom made housing. In my opinion, the size and weight are the most ideal in relation to the rest of the setup. A colleague uses a 7" monitor from Weefine and usually doesn't use it due to its size and weight. Greetings from Switzerland, Tino

Hello everyone, I'm new here and signed up after reading a lot of posts. I've been diving since 2004 and now have over 1300 dives, most of them practically on my doorstep in Lake Constance here in Switzerland. But I also dived into various warm waters: the Red Sea, Maldives, Croatia, Bali, North Sulawesi, Malaysia, Borneo, the Azores. Since my first dives I have been traveling with the camera and with a wide variety of systems. I currently have the following in use: Sony A7III in Nauticam housing Monitor housing (Custom made) Sony 16-35 F4, Sony 90mm Macro INON flashes (Z-240 and D-2000), backscatter mini flash Sony RX0 in Sony underwater housing Sony RX100III Above water I have a large Sony equipment with an A7IV as the main camera and various lenses. I'm looking forward to hopefully many exciting discussions! Greetings from Switzerland, Tino