Sokrates

Looks like boys got the episode up.

Since you are looking at the 26601, i assume you want TTL and the works instead of the manual 26350. I have Turtle for Sony and and im happy with it. Theres plenty of UW-Technics user on the board also, and im sure you cant go wrong with them either.

Regarding TC, they are not needed. Its about your preference what kind reach you need for you lens. For the Dome, i think you old dome will work just fine, all Zen domes (100/170/230) are listed on the port chart for the 8-15. Extensions might be bit trial and error to find the perfect one. Theres info in this thread. Also few other threads also found on the forum. I guess that 20 or 30 extension is enough without TC. But as the Canon 8-15 with Metabones is not officially supported by Nauticam, you have to rely on other users who have this for info. So your setup would look something like this Housing->N100/N120 adapter->N120 extension->Dome OR Housing->N100 extension->N100/N120 adapter->Dome

From what i can see, the AOI housing is custom made to fit only the AOI HSC-03 trigger that is supplied with the housing. You can see the very tight fit here, leaving no space for any other trigger. Other thing is that the housing has custom pins that connect the trigger to the LED's baked in the housing. And these you dont find in any other trigger. But AOI does say that it supports Sony TTL, so i think it should work. And Backscatter strobes are made by AOI.

Would be interesting to know if the dryer was actually marine certified (more expensive) than just normal off the shelf fitted on the boat. I would imagine that dryer is pretty much running 24/7.

Some more tests on it https://www.seacam.com/en/opp-test/ Includes also a huge 900mb pdf link to test images.

Good choice. Now you dont have to second guess about the camera. Theres a good chance you can use the old camera to some extent, fingers crossed. Just dont force it when trying. But to be in the situation where you would need the old body, something really catastrophic would have already happened. For lenses, you could just forget the 16-35 as the 8-15 covers very well, specially with the TC. And have the 140mm dome which would be better for your Polynesia. Or if want to go with big dome route cheaply, get the 8" acrylic dome. They go for €400 used and brand spankers isnt too much either (compared to 230mm glass). And in all seriousness, im still going to suggest Nikonos RS13 for the long term😉 Unless the upcoming Laowa 8-15 AF is really really really good.

Zoom gear designer mentioned here Also its suggested that 30mm is enough extension same thread few replies in

Yes. https://www.metabones.com/products/details/mb-ef-e-bt5 I think the Mark IV works also but im not 100%. The Sony native Laowa 8-15 is also coming "in near future", if you have some time to wait (and believe it will be good).

Yes, the info found on it is bit limited. But apparently it was pretty good lens optically and looks like it was bloody expensive aswell. Thats one reason i figured maybe try something with it, rather than just toss it. Obviously im hoping it turns out to be the next big thing for Sony 🤣 (wishful thinking) Too bad i sold my 28-60 with WACP when went for RS13 only setup. I guess next step would be designing and printing the adapter and buying a lens. Maybe this is one more "forever" project on the list. If anyone would have any suggestions what to do with the lens, would be grateful.

So.. I found a real old Gates housing listed for 100EUR. I figured ill just buy it because the pictures showed it had a dome attached (pictures were bad) and my initial thoughts were to buy the Gates-Nauticam adapter, or possibly design and print one myself. So i went to pick everything up today, and the housing weights a ton, cant figure out what camera its for as it just says Gates. Old one surely as it has viewfinder for eyepiece. Could be just pre-digital even? Anyway i would have been happy with the dome (ended up being 140mm acrylic SP44), but the seller then said that i can take the other lens also. Hold on, there was another lens? So there was also a Gates SWP44, in great condition. And this got me thinking more, can it be adapted and used with 28-60 on Sony kinda like as WACP? Or is it just expensive piece of glass that has no use anymore?

Just need to order the old Kraken bulkhead. New one is perma attached like Nauticam and its M24 only. Looks like the isotta housing has three M16 holes. New and old Kraken side by side (old on left)

Just checking, are there any news on these?

Friend of mine is just getting the same in few months time, OM1ii in Nauticam. He is getting the the ULM laser trigger, but i guess you want to use HSS when looking at the TRT one? For the size, im 99% sure the TRT fits, as the Nauticam housing has huge space for their own bulky trigger. I have TRT 3 myself, for Sony, but its pretty much the same. The only thing i dont like is that you have to connect the cable from led's to trigger when taking/putting camera in, and have forgotten about it once and almost felt like i broke the pins/cable when taking the camera out.