Jump to content

New AOI-P1 strobe, first impression

Featured Replies

Posted

Due to this thread https://waterpixels.net/forums/topic/2349-aoi-uis-p1-strobe/#comment-20074

I finally bought a pair of these strobes and i would like to write here my firsts impressions, before go into the water, what will be next week.

Before anything here you can see the size of the strobe in compare with other well known strobes, from top to bottom, a Sea&Sea D1, a Sea&Sea YS120, a Retra Pro X s, a Subtronic 160 pro Alpha, and the AOI.

The first impression is that is a heavy and well made strobe, I do like the batteries, I would prefer the 18650 instead of the 21700 but this 21700 is not hard to find either in amazon, aliexpress or any good electronics store. I do really like the screen showing how many shoots you can take with the selected power. I do like the location of the optical connector next to the 1" ball and the type of it, with no threads. I DON't like to press two buttons at the same time to switch it on, I don't like the size of the selector dial, it's to small and in fact there is already in the box an extension knob, which will have to be glued to the dial in order not to lose it.

It comes with a diffuser which I had to use in the water first, to decide if I like its fitting or not and there is also in the box a neopren bag to transport it which instead of it I would prefer a neopren protection cover for the water, anyway its not difficult to make it myself or customize this bag to convert it in a cover.

Next week I write here my first impression once in the water. I will also test them properly in my next trip to Similan island, the plan is 40 dives in the trip, so i think is a good test.

20251113_174002.jpg

4 hours ago, atus said:

t.

20251113_174002.jpg

Thank you for this picture.

It is the confirmation that the choice of buying the new retra max II was to good choice... the other strobe are so huge in compareason of the retra..

  • Author

Well, after the first dive with them I have found that they don't feel that big and the light is great, but the fires left counter is not trustworthy. I charged the batteries on thursday and I went diving this morning, apparently the batteries were totally charged, and after some checks with the pilot light etc both screen showed 250 fires at full power. One of the strobes only fired 10 times at 1/2 power, it switched off itself, I tried to switch it on underwater and the screen was on for only 2 seconds. When I left the water I swapped the batteries between strobes just to make sure it was an issue with the batteries and was that, so I'm relieved. Once the batteries on the charger one of them shows only 2,90 volts. I'll have to check if it's a faulty battery or there was an issue with the charger. All four batteries are brand new Supe 21700, 5000 mah. The charger is a brand new Sumlytour for batteries from AA to 21700 which I got from Amazon.

While I'm writing this I went to check the chargers brand and I found out that the failing battery was almost charged what can't be right as long as it's been charging for only 20 minutes, so I put my hand on it and it changed for almost empty. So I guess it was an issue with the charger.

I am also a happy owner of the latest AOI P1s. I used them on my last two trips, one month in Papua New Guinea for wide-angle photos and in Lembeh in black water.

I immediately found them very good, with excellent light coverage, uniform light, and exceptional battery life.

In black water, I really appreciated the low-power burst mode.

The batteries you need to use with this strobe must have a 25A discharge (I am using 21700 Xtar 25A batteries). You can use other batteries, but the performance will be different.

I also used TTL and HSS mode and was impressed. I used their trigger on my Sony. I've always been skeptical of TTL mode with fiber optics, but AOI has done an incredible job; it works very well.

  • Author
18 hours ago, bvanant said:

Better the charger than the battery.

Bill

I didn't see it before, but these batteries have an integrated usb port C with an colored led light so I can charge them directly with my phone charger. I´ve bought a 4 usb port charger so I can charge all of them easily.

  • Author
9 hours ago, Giancarlo M. said:

I am also a happy owner of the latest AOI P1s. I used them on my last two trips, one month in Papua New Guinea for wide-angle photos and in Lembeh in black water.

I immediately found them very good, with excellent light coverage, uniform light, and exceptional battery life.

In black water, I really appreciated the low-power burst mode.

The batteries you need to use with this strobe must have a 25A discharge (I am using 21700 Xtar 25A batteries). You can use other batteries, but the performance will be different.

I also used TTL and HSS mode and was impressed. I used their trigger on my Sony. I've always been skeptical of TTL mode with fiber optics, but AOI has done an incredible job; it works very well.

Next weekend I'm planning 3 dives to test a lot of new equipment before a trip to Similan islands where we go on a 10 days dive cruise, so I can deeply test these strobes, I'm pretty sure i will fall in love with them but I didn't expect that lack of accuracy in the number of shots remaining. If that was accurate I would know before enter the water that the battery wasn't charged.

And about the batteries, well, when I bought the strobes I bought the batteries to the same seller, he offered me that SUPE batteries and as long as SUPE is also an underwater strobe manufacturer I thought they were the right ones. I soon will see its performance. and if it's not right I'll buy new ones

Important Information

Terms of Use Privacy Policy Guidelines We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.