Dave_Hicks Posted February 6 Share Posted February 6 I just finished my Lensbaby Focus gear. It took 4 parts, but it works great. The lens is very simple and does NOT support autofocus or aperture control from the camera. Entirely manual. I made it for a friend that likes to experiment with these creative lenses. Spacer to sit under the gear and raise it to the level of the Housing's cog. Gear with slots to engage the collar and turn the gear. Slides over the collar and supports the telescoping lens. TPU sleeve to grip the lens Collar with pegs to engage with the gear cylinder 1 1 Link to comment Share on other sites More sharing options...
Davide DB Posted February 6 Author Share Posted February 6 I updated the first post with the latest links from this thread. If you want your project added just post a public valid link here. Thank you all, this is becoming a terrific useful list! 1 Link to comment Share on other sites More sharing options...
Jochen Posted March 21 Share Posted March 21 attached are measurements and printable file for a flexitray adaptor with integrated Swiss arca plate. Would be interested if anyone is using it! Nauticam_SwissArca_Adaptor v23.f3d 3D Print adaptor.docx 2 Link to comment Share on other sites More sharing options...
Davide DB Posted March 21 Author Share Posted March 21 3 hours ago, Jochen said: attached are measurements and printable file for a flexitray adaptor with integrated Swiss arca plate. Would be interested if anyone is using it! Link added Link to comment Share on other sites More sharing options...
Jochen Posted April 21 Share Posted April 21 Another cold weekend here so I setup my gear with the printed adaptor plate for the Nauticam flexi tray. Even above water the setup is rock solid including the ball head. The tripod legs only just stay in place with the weight of the camera and light, but that should be no problem in-water. An issue might be to get low enough to the subject as the ball head adds quite a bit of height. Might have to look for a lower profile version of a ball head or even just use a "levelling ball head". 1 Link to comment Share on other sites More sharing options...
brightnight Posted May 11 Share Posted May 11 (edited) N120 body cap found on Thingiverse worked for me: https://www.thingiverse.com/thing:5326351/files Files attached too: Nauticam N120 Port Cover Male - 5326351.zip Edited May 11 by brightnight Added pics and files 1 2 Link to comment Share on other sites More sharing options...
Davide DB Posted May 11 Author Share Posted May 11 7 minutes ago, brightnight said: N120 body cap found on Thingiverse worked for me: https://www.thingiverse.com/thing:5326351/files Files attached too: Nauticam N120 Port Cover Male - 5326351.zip 2.48 MB · 0 downloads Link added. Thanks 1 Link to comment Share on other sites More sharing options...
brightnight Posted May 12 Share Posted May 12 (edited) N120 female body cap also works: https://www.thingiverse.com/thing:5326279 Nauticam N120 Port Cover Female - 5326279.zip Edited May 12 by brightnight 2 1 Link to comment Share on other sites More sharing options...
Alex Tyrrell Dive4Photos Posted June 21 Share Posted June 21 Hi has anyone printed a N100 Port Cover Female (Rear Port Cap) and would be willing to share the files so I could get some printed locally? Link to comment Share on other sites More sharing options...
Isaac Szabo Posted June 21 Share Posted June 21 (edited) On 6/21/2024 at 8:17 AM, Alex Tyrrell Dive4Photos said: Hi has anyone printed a N100 Port Cover Female (Rear Port Cap) and would be willing to share the files so I could get some printed locally? I think this should work. It works on my 3D printed N100 ports. I don't have an actual Nauticam port to try it on. Maybe get one printed first, and if it works well order more. Edited June 22 by Davide DB Wrong file: removed Link to comment Share on other sites More sharing options...
Isaac Szabo Posted June 22 Share Posted June 22 Actually, I think this version has a better chance of working. Maybe a moderator can remove the other file? N100 rear cap.stl 1 Link to comment Share on other sites More sharing options...
Davide DB Posted June 22 Author Share Posted June 22 5 minutes ago, Isaac Szabo said: Actually, I think this version has a better chance of working. Maybe a moderator can remove the other file? N100 rear cap.stl 3.48 MB · 0 downloads If someone has the opportunity to test it, I will add it to our "proven parts list". 1 Link to comment Share on other sites More sharing options...
Alex Tyrrell Dive4Photos Posted June 23 Share Posted June 23 Thanks Isaac, very much appreciated. I'll send it up to the 3D Print Shop in Bangkok and when I get it back check it on the original Nauticam Ports and post back here to confirm it fits 2 Link to comment Share on other sites More sharing options...
shokwaav Posted June 24 Share Posted June 24 Designed a N100 Male Port Cover - remixed from the N120 version. It's printed in two pieces which are friction fit together to avoid use of supports. Please let me know if there are any issues. N100 Male Part 1.stl N100 Male Part 2.stl 1 1 Link to comment Share on other sites More sharing options...
Alex Tyrrell Dive4Photos Posted Tuesday at 06:37 AM Share Posted Tuesday at 06:37 AM I had Isaac’s N100 Female Port Cover printed and they fit the N100 port perfectly, probably a better fit than what is supplied from Nauticam! Thanks again @Isaac Szabo 2 1 Link to comment Share on other sites More sharing options...
Isaac Szabo Posted Tuesday at 04:47 PM Share Posted Tuesday at 04:47 PM 10 hours ago, Alex Tyrrell Dive4Photos said: I had Isaac’s N100 Female Port Cover printed and they fit the N100 port perfectly, probably a better fit than what is supplied from Nauticam! Thanks again @Isaac Szabo That's great to hear. Glad it worked for you. 1 Link to comment Share on other sites More sharing options...
Recommended Posts