Hello everyone,

 

What official options are there for owners of other brands of housings to mount Nauticam wet lenses while keeping the qualities intact? 

 

Regardless of judgments, it is a fact that these optics have changed the market. Here is an excellent roundup of the various models available.

 

 

 

I often see photos of various brands' housings with WWL-1 or WACP or EMWL but cannot find mention in the manufacturers' catalogs.

 

Recently I saw that Isotta has included an adapter for WWL on their site but otherwise...

 

Personally I understand the competitors' intention to defend their brand but I find this behavior even counterproductive because sometimes you are a victim of vendor lock-in.

Knowing that you can change housing and still use them or that my housing can use them and I don't have to change it.

The wet lenses use a bayonet mount (apart from the original WWL-1 which has an M67 thread) and the while bayonet mount screw onto an M67 threaded port the issue is that the bayonet attachment for the port has a U-shaped groove and is the port lip is too wide it won't screw on.  It might work on some ports but not others.

 

One work around is to adapt a Nauticam port to your housing and this will work if you can get the right adapter length/port length combination.  If you have a Isotta or Sea and Sea housing that uses N120 ports you can adapt  the Nauticam port directly by changing the lug plate over to a S&S/Isotta lug plate.

 

22 minutes ago, Chris Ross said:

the issue is that the bayonet attachment for the port has a U-shaped groove and is the port lip is too wide it won't screw on.  It might work on some ports but not others.

 

Yes hence my question: are there option supported by manufacturers that not imply file and saw?

 

22 minutes ago, Chris Ross said:

If you have a Isotta or Sea and Sea housing that uses N120 ports you can adapt  the Nauticam port directly by changing the lug plate over to a S&S/Isotta lug plate

 

OK thanks

 

Sagadive.com makes WACP N120 adapters for at least seven different housing brands.

 

In Marelux world the 32 flat port with 67mm threads works with the Sony FE 28-60mm and WWL-1/1B.

 

Marelux also has an N100 to Marelux 5 inch 17mm adapter for the same Sony 28-60 and WACP-C.

 

Marelux also has a Nauticam N120 to Marelux 5 inch 20mm extension which works with WACP-1/2 in the N120 mount. It also works with ports like those from Nauticam and Zen. I use mine with the 12 inch Matty Smith dome for split shots. The Sony FE 28-60 works with the WACP-1 direct mounted with no additional extension. In the photo of WACP-1 mounted on the Marelux housing I am using the 20mm NA to MX adapter and a 30mm Marelux extension while testing a Tamron zoom with WACP-1.

 

Marelux also has the Aquista line of wet wide lenses coming soon and you can also get to 130 degrees with the excellent Laowa 10mm F/2.8 rectilinear auto focus lens for Sony FE and Nikon Z.

 

Silver housing is WWL-1, Top view short adapter is the WACP-C and WACP-1 with two extensions.

 

Thank you Phil 

Good morning,
Isotta recently modified a port to accept the Nauticam M67 Bayonet Converter II and adapt the wwl-1b and wwl-c for the Nikon z 24-50: M67 H63 B120 macro port.
They have an adapter for wacp (seen on divephotoguide dema 2023 on youtube) but I don't have the reference.

Edited June 9, 2024Jun 9 by Loïc35

On 6/9/2024 at 11:16 PM, Phil Rudin said:

Sagadive.com makes WACP N120 adapters for at least seven different housing brands.

 

In Marelux world the 32 flat port with 67mm threads works with the Sony FE 28-60mm and WWL-1/1B.

 

Marelux also has an N100 to Marelux 5 inch 17mm adapter for the same Sony 28-60 and WACP-C.

 

Marelux also has a Nauticam N120 to Marelux 5 inch 20mm extension which works with WACP-1/2 in the N120 mount. It also works with ports like those from Nauticam and Zen. I use mine with the 12 inch Matty Smith dome for split shots. The Sony FE 28-60 works with the WACP-1 direct mounted with no additional extension. In the photo of WACP-1 mounted on the Marelux housing I am using the 20mm NA to MX adapter and a 30mm Marelux extension while testing a Tamron zoom with WACP-1.

 

Marelux also has the Aquista line of wet wide lenses coming soon and you can also get to 130 degrees with the excellent Laowa 10mm F/2.8 rectilinear auto focus lens for Sony FE and Nikon Z.

 

Silver housing is WWL-1, Top view short adapter is the WACP-C and WACP-1 with two extensions.

 

Have you tried installing the marelux port on the M67 to Bayonet Mount Converter II?

 

If I understand your question correctly, yes I have mounted the bayonet mount II on the Marelux 32 flat macro port to use with the Sony FE 28-60mm and the WWL-1B. Note in the images that the MX-32 port is shorter than the Nauticam port and the BLUE lens release hits the port when it is pushed down to release the lens. In the photo you will see I shaved a few mm off the blue release to make it work more easily.

 

20 hours ago, Phil Rudin said:

If I understand your question correctly, yes I have mounted the bayonet mount II on the Marelux 32 flat macro port to use with the Sony FE 28-60mm and the WWL-1B. Note in the images that the MX-32 port is shorter than the Nauticam port and the BLUE lens release hits the port when it is pushed down to release the lens. In the photo you will see I shaved a few mm off the blue release to make it work more easily.

 

 

 

 

Thank you very much, that's what I'm trying to understand.

3 hours ago, boduoguo said:

Thank you very much, that's what I'm trying to understand.

Marelux also has adapters for N 100 lenses like wet lenses like WACP-C and N 120 for WACP 1/2. 

On 10/30/2024 at 12:02 PM, Phil Rudin said:

Marelux also has adapters for N 100 lenses like wet lenses like WACP-C and N 120 for WACP 1/2. 

Phil, @Phil Rudin

What about canon? If there is now a Marelux zoom gear for the RF24-50, it seems possible to adapt the WLL-1c? Any hint on required adaptor and port ?

Will the new Aquista an alternative to the wll1?

Thx.

Edited Saturday at 02:14 PM1 day by Cyrille

Marelux has a zoom gear for Canon RF-S 18-45 which has been used on APS-C with a wide way lens. Have not heard at what point the RF24-50 will be supported. Marelux focus is on supporting Marelux wet lenses at this point.

Marelux has several wet wide lenses including the Aquista 120 which I used Saturday’s (May 30th 25) for the South Florida Underwater Photography Society Meetup Dive at Blue Heron Bridge. The day was a bit overcast, water temp was a bit on the cool side and visibility was not the best. So a wonderful day for some close-focus work. My tools of choice, the Sony A7CR and Sony FE 28-60mm zoom in the Marelux MX-A7CR housing, with two Apollo S strobes and the new Aquista 120 Wide Angle Wet Lens. This lens is 130 degrees at the 28mm setting.

Cushion Starfish at 28mm, ISO-320, F/20, at 1/160th sec.

Octopus, horizontal shot at 48mm, ISO-320, F/14, 1/60th sec.

Octopus, vertical at 60mm, ISO-320, F/14, 1/60th sec.

1 hour ago, Phil Rudin said:

Marelux has a zoom gear for Canon RF-S 18-45 which has been used on APS-C with a wide way lens. Have not heard at what point the RF24-50 will be supported. Marelux focus is on supporting Marelux wet lenses at this point.

Marelux has several wet wide lenses including the Aquista 120 which I used Saturday’s (May 30th 25) for the South Florida Underwater Photography Society Meetup Dive at Blue Heron Bridge. The day was a bit overcast, water temp was a bit on the cool side and visibility was not the best. So a wonderful day for some close-focus work. My tools of choice, the Sony A7CR and Sony FE 28-60mm zoom in the Marelux MX-A7CR housing, with two Apollo S strobes and the new Aquista 120 Wide Angle Wet Lens. This lens is 130 degrees at the 28mm setting.

Cushion Starfish at 28mm, ISO-320, F/20, at 1/160th sec.

Octopus, horizontal shot at 48mm, ISO-320, F/14, 1/60th sec.

Octopus, vertical at 60mm, ISO-320, F/14, 1/60th sec.

So Phil, I had a look at the Marelux wet lenses just now, is there some sort of port chart to work out which lenses they will work with? At the moment there is just the lens posted with no additional information I could find.

Since at least last year Isotta can be used with the WWL-1B without modification with the correct port (e.g. H59 B120 for Sony 28-60mm). The WACP can also be used with an Isotta made adapter. There is actually a video that shows this ... Insider DIvers Youtube channel "Do Nauticam Wet Lenses work on Other Housings? YES, THEY DO"

[CBA]

Edited 3 hours ago3 hr by Alex_Mustard