Hi

I found that the original cap have some problems.

• nothing to hold it when not on the lense

• Heavy (relatively ;) )

• Black... I don't like ... seriously difficult to find if it his lost.

I build a new one, to print with TPU

l

You can print it in red ( like I made it) or black and why not pink or some phosphorecent TPU....

If you want the 3D STL... ask I will sent you the file.
If you want some modification same ask...

The result,



I need to attach a small bungee and it is ready for the trip

Seems to me it could use a short lens hood for a bit more protection for the front glass?

8 minutes ago, Chris Ross said:

Seems to me it could use a short lens hood for a bit more protection for the front glass?

I made one for the mfo-1. It is very effective.

Edited 51 minutes ago51 min by Dave_Hicks

3 hours ago, Chris Ross said:

Seems to me it could use a short lens hood for a bit more protection for the front glass?

I'm working on it, built a TPU version but it doesn't fit with 82mm cap (which is common for the original lens cap), the Nauticam 57$ m82-filter-holder-for-mfo-3 inspired me to make a refined version, shall be ready in couple days.

3 hours ago, Chris Ross said:

Seems to me it could use a short lens hood for a bit more protection for the front glass?

Not a bad idea... on the other side the MFO-3 is for larger subject.... normaly the glas didn't approach coral or other things...

I have the base to build a short hood I'll make that today

Edited 4 hours ago4 hr by CaolIla

Hola,

if you post the STL file or give me a link to it, i will publish in our DIYpedia post