TimG Posted August 30 Author Share Posted August 30 On 8/24/2024 at 9:38 AM, TimG said: So far I have EU/UK requests from: @Joerg Malke 4m to Germany @makar0n 6m to Belgium @Michael 12m to Germany @CaolIla 10m to France @fruehaufsteher2 3m to Germany @Muellema 6m to Germany Link to comment Share on other sites More sharing options...
TimG Posted August 30 Author Share Posted August 30 2 minutes ago, TimG said: So far I have EU/UK requests from: @Joerg Malke 4m to Germany @makar0n 6m to Belgium @Michael 12m to Germany @CaolIla 10m to France @fruehaufsteher2 3m to Germany @Muellema 6m to Germany Guys, no rush, but could you send me mailing details please for each of you. I suggest a PM. (Marcus: noted on your milling issue) Link to comment Share on other sites More sharing options...
TimG Posted September 9 Author Share Posted September 9 Just a quick update on the fibre order: it's on its way and it scheduled to reach my mate in NYC tomorrow. Yay! No change on when I can start shipping it out to you guys. 2 Link to comment Share on other sites More sharing options...
Michael Posted 3 hours ago Share Posted 3 hours ago Thanks Tim for organizing! And i want to add something to the topic: "Make your own": I broke already a few meters (even of the 613 core) due my strobe arms and clamps being pretty tight when i move them around and sometimes the relatively thin cable (with its 2-2.2 mm outside diameter) gets in between the arm and the clamp and gets kind of crashed. First i tried to fix the routing of the cable with velcro straps to the arm but that didn't really work. Last thing i'm testing at present is: cover the cable with something so that the outer diameter is larger and the chance to get in between the small gap of the arm and the clamp is kind of impossible. What did i use: i had plenty of paracord left from my Lanyard DIY projects. So i removed the inner part and used the outer part as sleeve for the cable. It is a bit loose but works by now. I know, not everybody may have this issue but maybe it's an useful idea for someone. Just cut the Paracord about the same length as the strobe cable is, heat the ends and install the connectors. A drop of superglue will fix the paracord on the connector (and can also be removed without destroying the connector). 2 Link to comment Share on other sites More sharing options...
TimG Posted 2 hours ago Author Share Posted 2 hours ago 36 minutes ago, Michael said: So i removed the inner part and used the outer part as sleeve for the cable What a super idea! I've not had the problem of the cables getting trapped (yet?) but this is a clever way around it. Thanks, Michael. Link to comment Share on other sites More sharing options...
CaolIla Posted 2 hours ago Share Posted 2 hours ago My solution since 6 month is to build some arms with a small tube in it the fiber in the arm come out on the other side.... and go in the next arm and go out before going on the strobe. I love this setup Link to comment Share on other sites More sharing options...
CaolIla Posted 40 minutes ago Share Posted 40 minutes ago null null Link to comment Share on other sites More sharing options...
CaolIla Posted 38 minutes ago Share Posted 38 minutes ago (edited) I took some pictures to give an idea Edited 37 minutes ago by CaolIla Link to comment Share on other sites More sharing options...
Recommended Posts